Search results

I happen to have a marketing document from kubota that describes the specs for the B3000. It doesn't say a lot about the cab differences. I think I remember seeing that in the premium cab that you got things like heated rear glass, window washers back and front outside cab lights and a few...

I have a King Kutter II (reverse tine gear drive 60 inch tiller) and it came with grease in the gear box. The manual said check oil before initial running. I opened the fill plug to check the oil and found it full of grease. I called the factory and asked them what's the story. They told me...

https://www.amazon.com/MFX-Design-Danger-Tractor-Sticker/dp/B07GRJN3G7/ref=sr_1_300?dchild=1&keywords=kubota+label&link_code=qs&qid=1605989049&sourceid=Mozilla-search&sr=8-300

I put wings on my bucket for a snow pusher affect and I use shoes on the wings to avoid digging into the gravel. I don't back drag with the bucket. I also have a box blade on the back to move snow or back drag. I use edge tamers when picking up dirt, bark chips, moving fertilizer from piles...

In my case I have has good luck with tilling all one direction on the final plot till. This leaves your divot for each row tilled all on the same end of the plot. Then I make a final run by tilling down the line of divots so that when you get to the end of your plot everything has been...

I have a semi-auto in 50AE with extra mag and ammo. Never been fired. I am the original owner and bought for a collection. I am gradually selling off the collection now so this could be available?

Not sure where the 24.4 amp reference came from, as it looks like the label says it's a 21.5 FLA motor.

First off I am not an electrical engr or an electrician. When I built my house In did the wiring and was taught by an electrician the following: circuit breaker was sized so that the expected load on a circuit was only to be 80% of the breaker capacity. So if the expected load was expected to...

MTL makes grapples and here is a single clam shell model at 350 pounds. https://www.mtlattachments.com/attachments/48-hd-root-grapple-hydraulic-brush-grapple-attachment-wk53p Here is a 60" double clam shell model at 390 pounds...

Ya, there isn't a lot of real estate to choose from to locate your 3rd function valve on the B3000. I mounted mine on the FEL arm. With the cab on my tractor there just isn't any convenient place to put a 3rd function valve block so that there is easy access and minimal interference with other...

Here is one idea that was posted earlier. Seems like a nice solution to me. https://www.orangetractortalks.com/forums/showthread.php?t=15618&highlight=gannon+hitch

I don't have a B2650 or B3350 but I do have a B3000. I have replaced the rear wiper blade and I used this replacement blade and it works very well. https://www.amazon.com/gp/product/B000XH82O6/ref=ppx_yo_dt_b_asin_title_o02_s01?ie=UTF8&psc=1 I think the cabs are pretty similar to mine so...

I have a B3000HSDC and have converted the FEL to SSQA using the ATI adapter for this model tractor. I have the Titan Fork lift adapter for SSQA and I have the Titan landscape rake for the 3pt and both implements have worked well for me. My forks are rated for 2K and that exceeds the lift...

Check out this thread for a very creative idea for an indicator light. https://www.orangetractortalks.com/forums/showthread.php?t=42332

X2 Very nice solution. Thanks for sharing the concept

A few years back we purchased and old walk in cooler that we set up for hanging and aging our wild game harvest. We have aged venison, elk, black bear and moose for a minumum of 14 days and in one year we had venison and elk meat hanging for 21 days. Nothing scientific about our setup and...

There is a safety switch on the PTO shift lever in the cab. if the level isn't firmly in the off position, then the engine will die and it will not start (engine won't even turn over). Pull the lever firmly back into the full dis-engage position and try to start it.

Any pictures of your third function valve install? Are you happy with it or would you have preferred to do something different on your install?

Here is something I did for my tool box behind the seat of my B3000. It might also work if your cab has similar setup. http://www.orangetractortalks.com/forums/showthread.php?t=40600

I have a cabbed tractor and haven't been able to find a convenient place to add a tool box. There is a small cubby hole tool box just behind the seat but you can hardly put anything in there (can't hardley even get your hand into it). So I decided to try and find something I could mount on the...