Search results

Heat is your friend. Preferred is oxy-acetolene, but even a cheap mapp gas with turbo helps greatly if you get the metal glowing.

Probably never been out before. Some cleanup with wire brush and paint in it's future? I thought I only needed to remove fel when I split the tractor, but after making the right pieces to do so, the 5 minutes it takes to remove it makes it a handier tractor for other jobs not needing the fel.

After building the missing parts, mine came off like it should. Countrylife, as NIW suggests, it must be rusted stuck. You did take the 2 front bolts out I presume.

^^^^^ exactly what I thought from the beginning. I do think there was some good contributions as to the inner workings of hydrostatic transmissions making the thread not a total waste.

Where do you see that he has already sent the payment? To op, I wouldn't pay by any means that there is no recourse. Cc, PP, etc is your friend.

Did you open the shut off to fuel filter after replacing? Easy to forget to open it back up when doing several things.

New member comes on, and makes demands of what is posted, and insults a mod. That is always a good way to start.

WSM = work shop manual. It along with a parts manual will show you where the relay is.

The cost of the new fluid will be miniscule compared to ruined internal parts from rust.

Such negativity towards OP and his desire to get this going. You think after the first 2 pages he didn't get the point it will involve some outlay and effort? Fixating on the missing parts of the feet, which can easily be reproduced with a rudimentary welding fab abilities. I come here for...

Nice job restoring it. It is certainly worth doing to me, if you can bring back a tractor to full functionality.

Since the op was from 2019, hopefully he has it figured out by now.

I believe it used the V1200.

I got one on Amazon for $30 with a dozen adapters for glow plug and injectors.

If it's inside, especially in walls, pressure below 120, Pex would probably work. To me, the cost of the PAP is low enough, and it's benefits over Pex b is substantial for that application. But to each his own. I've worked with it for over 30 years, and it's predecessor quest before that, in...

Amazon has 300' roll for $108 US.

If you have the fittings and not the pipe, I would go with PAP instead. Pex-al-pex has the advantages of Pex connectors, with the pipe not being susceptible to the disadvantages of straight Pex. The aluminum inner layer is the difference. It is much like gold label cpvc in that respect. There is...

It sounds like a short to ground beyond the glow plug indicator. Use your ohmmeter from the wire beyond the indicator to ground, and see if you have continuity. You shouldn't.

Pex, when exposed to Uv light is susceptible to chlorine failure. This is only a problem when it carries chlorinated/city water, not air. This is not to judge on it's appropriateness for air use in it's other properties, however.

minimum is 327psi, and all 4 should be within 10% of each other.