Search results

Thanks..

I thought for sure it sounded better but I'm old 1/2 deaf and figured it was wishful thinking.. thanks (y)

Will do thanks. Did you hear the difference in the new video? Or is it me and wishful thinking..

The only thing I did differently was I ran the pto without installing the shaft and bearing for a few seconds to see if I could hear or see anything wrong it seemed fine . I don't know maybe had a clutch stuck and running without shaft freed it up???

Hi Great thanks for info. I put it back together order the oil started it up to move and clean. Tried pto now seems fine or have I lost what little mind I had. This is without adding oil it wasn't dry and I ran it a few seconds.

Thanks Dick B do you have any idea how much it will hold ? And is the oil you mentioned the same same as 80/90 gear oil ? The reason I ask when I drained the tractor what came out looked smelled and felt thick like 80/90 . I got this thing used about 1 1/2 ago so know none of its history or...

Ok well not sure my next move thanks all. Can you tell which way the sleeve goes back on it was off laying inside the rear and what weight oil and amount goes back in the rear. I've got no books or anything on this tractor Thanks

I was just looking at this picture does this look chewed up?

Hi I found out 2 things today kubota rears have a shit load of oil and hay makes a great substitute for stay dry even you run out. I pulled the cover and shaft everything to the naked eye appears fine no missing teeth no tore up spline.

Ok everyone thanks for the help. I'm a retired mechanic so I know without taking it apart you will not know the extent of the damage. But what would you say best case maybe just a gear needs replaced or a bearing. And worst case it's completely shot needs trans/pto complete replaced or rebuild...

HI T Thanks for the reply. The only difference in noise is when it's under a load or not engaged at all. If you Thanks

HI T Thanks for the reply. The only difference in noise is when it's under a load or not engaged at all. If you Rev it up while engaged same noise. It just happened the year since I owned it. it's never made the noise before I hooked up the backhoe engaged pto heard a loud clunk I've never...

H O I disconnected the cable and engaged it by hand sill made noises completely engaged

Just did it thanks

Video's PTO disengaged and engaged Thanks in advance https://youtube.com/shorts/2SxUUXShwiQ?feature=share https://youtube.com/shorts/vETXtCvNk0Y?feature=share

Hi Yes it goes right in like new no grinding no noise then release the clutch it clatter but if you say engage the outriggers on the backhoe the noise stops. I took off backhoe still noise. Weird that making Hydraulics on the backhoe move stops noise from pto?? And I checked today just over 300...

And with nothing connected it still makes noise when pto is engaged.

Hi all new guy here I've got a kubota l3301 tractor I also have a 3 point backhoe I use around the house, yesterday I hooked it up and engaged the pto let out the clutch and heard a not good sound like a bang then the pro started making noise metal clicking . As soon as I disengage the pto it...