Search results

Well yes and no. I pulled the rear shaft all the way out checked everything then started the tractor engaged the pto with shaft out for a couple minutes. I put it back together added oil (if you do this be prepared with lots of drain buckets lots oil) After everything was back in I started it...

Hi Again thanks all. It ended up being you have to release the pressure with KEY ON but not running push button move joystick left to right pressure gone quick connect work fine... Works like a charm now... Again many thanks 👍

Hi all Thanks to everyone It's working fine new quick connects everything sealed up grapple operating perfectly. But I've got the same problem I had before the grapple stopped. I can't disconnect the Quick-Disconnects the only way I've been able to do it is to release the pressure by loosing...

Seem Seems weird everything like new .. oh well it's going to be fixed now thanks to all👍

Just for my own piece of mind if it's not the size of the couplers. The current couplers just failed because they are cheap or just something that happens ? Thanks

Hi all thanks everyone It's the Quick-Disconnect fittings. It took them off at the tractor put in a bucket both side worked perfectly. Is there a chance anyone has guythe part numbers etc for new fittings adapters o rings all the goodies Everything on the tractor for the diverter is newer so I...

Ye Yes sir going to try this week

I I'm nearly deaf but when I put my hand on the solenoids it seems/feels/sounds both are engaging Thanks

W Will do thanks

Hi 4 on the bottom 2 on top of the 3rd function valve

The Tilt works fine both ways with any attachment no problem. I worded it wrong it tilts both directions but the open close of the grapple itself only operates in one direction (sorry ) When the grapple is on it tilts front back no problem. When I push the third function button and try and...

Yes I used it maybe 3 times then the last time I tried it the problem showed up. Everything thing else is fine tilts lifts does everything . The problem just popped up I've not used since. I bought everything as a package deal everything worked fine . I tore a hose on the grapple I replaced it...

Yes correct on the operation of the third function hold button left right open close. Yes if the button is not pushed you can tilt the grapple but it only operational in one direction. And both grapples are brand new used maybe twice I'm thinking it may be what Wolfman said the fittings. It...

One

I've switched connections numerous times same thing. Have changed hoses from another piece of equipment tried another cylinder from different grapple same problem. Thanks

Ok👍

La525

I've had this tractor for about a year and I've put around 50 hours on it. I've added nothing changed nothing it's exactly as I bought it. As far as oil I had the problem with grapple before I added the oil which I had lost when I pulled out pto shaft. As far as the controls I haven't touched...

Hi all Not sure how but my pto now works fine after I ran it with no shaft and bearing for a minute put all together 4 gallon of oil ran my bush hog no problems. Now my grapple won't work correctly it's got to be in the valve or the add on electric switch switch on the joystick. No matter...