Search results

  1. H

    Winter fuel question

    Listen to ob1 talked to the diesel distributor today ob1 is dead on as always. I have been thinking about putting either 1 tablespoon of diesel oil in the diesel fuel for the lubrication. Today the distributor said the same thing as brokersdad about adding the dextron for lubrication on the...
  2. H

    Rebuiding Cab

    You may need to slow down a little. Just be careful with the prednisone as you know bad on organs. My wife has RA also. Hope you get to feeling better good luck. You really have that beast looking good;).handyman
  3. H

    Rebuiding Cab

    Dusty congrads looks good and know you will really enjoy it in your neck of the woods when temp starts droping:).handyman
  4. H

    Dumb Question B7100 equipment dimensions

    :oStuart please check your private messages. I tried to post some pics and will apologize to you again for not doing it. I am still trying to figure out how to do it:o. handyman
  5. H

    Model number help

    I have a B7100 the number for model set on the seat look at left footrest beside interlocking padel you touch with your left heel to interlock both wheels . If you look there on side of trans. you should see the number. Hope I made myself understandable. This is where mine is located yours may...
  6. H

    Dumb Question B7100 equipment dimensions

    :oI will try to get my wife to help me post a picture of it and where I welded the adapters.Just remember this thing is old was cheep and used on a much larger machine but works well on mine. The newer pond scoops will probably work on the setup easier than this particular one reasons I will...
  7. H

    Dumb Question B7100 equipment dimensions

    :DThanks for everyones replies tried the scoop out made extensions worked on toplink. Thanks to EVERYONES input made it a simple change over to fit the 7100 hitch. The scoop works well thanks again handyman.
  8. H

    B7100 scraper blade or box blade

    :confused:I have a B7100 hst I have a pond scoop and trying to decide which would be the best attachment a scraper blade or a box blade to get next. I am using it mostly for mowing and filling in holes from trees I lost due to pine beetles. I am leaning more toward box blade. Someone who has...
  9. H

    D750 Engine cooling

    dunk better listen to aquaforce and killerbee on that one. I also have B7100 aquaforce or ob1 jump in on this. I mixed 50/50 water and antifreeze no more than 50 would this be ok as long as dunk and myself keep it topped off with water?
  10. H

    Newby bought an L2000...Help

    You got a GOOD deal and I know you will enjoy it.
  11. H

    Rebuiding Cab

    I have sheetrock overhead in my garage but prior to hanging the sheetrock I put 2 extra 2x8 and welded a steel frame around the beem then welded a lifting lug underneath that gave me a6x8 lifting beam. The upstairs is floored and used for extra storage . Will be looking foward to more pictures...
  12. H

    Rebuiding Cab

    Dusty I was wandering how your cab was coming alone? Glad to see more pictures looks good like your beam also. Are you going to lift the cab in your garage or another tractor? Post a picture when you get it on.
  13. H

    Where are the drain plugs for.....

    Go to articles page look on right side of list scroll down to servicing hydraulic screen I beleive this will answer your question or at least help you service dept vic I beleive wrote this.
  14. H

    Dumb Question B7100 equipment dimensions

    :D Made a couple of 5 inch extensions for each side of the scoop welded 2 new pins on, adjusted top link got this 30 inch bucket working. Little kubota handles it good. I used 2x2 1/4 inch wall for the extensions welded a plate on tubing welded pins to plate.Thanks OB1Kubota,Bruceatlam,Stuart...
  15. H

    Newby bought an L2000...Help

    If you want to check specs on the l225 go to tractordata.com and click kubota hope this helps
  16. H

    Newby bought an L2000...Help

    If your oil filter, air filter etc has numbers on the you can go to napa or auto parts and most of the time napa can cross them over. Talk to vic or ob1 first but RCOTRACTOR.com say they have a manual for it but I am not recommending them because I have never purchased anything from them(this is...
  17. H

    Newby bought an L2000...Help

    Service dept.vic or ob1 kubota is your best chance. I am new member also. I am sure either one of these people can help you.
  18. H

    Welding

    Gary I agree with all above vic, ob1,and pdr. I am not real technical but was a certified boilermaker and pipefitter a long time and still weld for myself. If you dont take the tires off make sure you keep valve stem downward so it will be easier for you to weld. The heat will build up a couple...
  19. H

    10w-30 or 15w-40 B62004wd gear

    Rick I am also new on forum and backward on posting things. But I have read a lot of vics advice and agree with him most of these people are VERY knowledgeable. I live in Tennessee smokey mountains I was told by Kubota dealer here to use 15W40 for exact reason as Vic stated . This Kubota dealer...
  20. H

    Dumb Question B7100 equipment dimensions

    Thanks stuart my wheels are already moved out but the pictures show you were having same problem as me.The scoop pins where lower arms connect are 31.5 inches wide.I think I have a solution for that I am welding some extensions inside the 3 ft. bucket the extensions will reduce the lower arm...