Search results

Thanks for the ideas. Gorilla adhesives are probably better than the factory self-adhesive sticker. Maybe I'll just do as dlundblad suggests and get a $7 ebay serial tag just for future reference.

Tractor's ID tag (2" x 3") on left side of the frame fell off. It feels like a thin film of foil backed by vinyl with the model # and serial # stamped into. Early 90's L2950D-51532. I would like it to be replaced or salvage this one. The back of this one has got a layer of rusted metal stuck to...

Ramos, I'll give that a try on the angle fitting after dowsing with penetrant. Steve, it is so corroded I couldn't see that the plug is an allen head! 100 td, I didn't write down the plug that goes into the cylinder angle fitting because I wanted to know how it could be removed and if the...

Yes, I looked up the parts diagram. It shows a plug-whether it is threaded it does not indicate ( I would guess it to be due to pressure). The diagram shows the 90 degree to be part of the cylinder-I was hoping someone had experience with changing this fitting hoping it is threaded rather than...

My L2950's FEL LA450 sprung a leak where the hose goes into the ram. I'm hoping this is a replaceable part. Hoping it is threaded. Is anyone familiar with this...is it a plug?[/ATTACH] Thanks, Mel

WSM is going to be a great help. Serial # L2950D-51539 and there isn't any ECs on the tractor. I couldn't make out the serial # so I tried my cell phone to photograph the scratched up plate. Does so much better than my fuzzy vision;) Any info on this tractor would be appreciated!

Bulldog, thanks for the explanation, now I understand. Nephew of the late uncle/owner of the L2950 mentioned the bars over the dash as supports when the fel is removed but it was pouring rain when I bought the tractor. So there weren't any lengthy explanations of the tractor. I normally don't...

100 td-I don't know how it was used. It does have rust which I believed was mostly due to being from a coastal area. I'm curious how chicken/turkeys are hard on tractors? I now realize the fel must not have been lubed very often. North Idaho Wolfman, thanks for the WSM link, though mine is a...

In the second photo, front below the grill, there is a bar with two threaded levers. Could someone tell me what this is for? Thanks, Mel

New to me L2950 with la450 fel. What are the holes on top of the bucket for, inner ones are threaded. I want to weld on chain hooks and I don't want to interfere with something I don't know about.

I recently acquired a 1992 L2950. I have questions about the FEL pivots, the bushing are worn. Is there a fix for this? The base of the joystick pops apart, The ball falls out of the ring around it. Therefore no bucket control for tilting up or down. Is there some sort of fastener on the end of...