Search results

Thanks for the responses. Benhameen - I assumed all my stuff was Cat 1 (box blade is questionable), so I will research the difference and see if that sheds any light on the situation. Do you have R4 tires?

I have an L3800 HST R4 tires (not adjustable to widen track) and the inside span between the rear tires is 29 5/8 inches. For comparison sake my previous L3010 had 31 3/8 inch rear span, and with the telescoping link stabilizers...... I had to be very careful when hooking up 3 pt equipment to...

I'm considering converting my LA524 loader to the QA set-up. Once I install the OEM QA, can I use any QA style bucket? Thanks for any/all help!!!

I just purchased an L3800 and want to convert it to the QA setup with Kubota OE parts. Does anyone have any dealer recommendations (within 600 mile radius of Dallas, Tx) that discounts from the MSRP pricing? Thanks for any and all help!!

I'm in the process of purchasing an L3800 HST, and was wondering if you still make the rigid style stabilizer bars......if so what would be the price on those? Thanks for your time and help!! Wendol Ross

I've continue to see a lot of used L3301, and L3901 tractors for sale, but being old school, still have a lot of concerns over the new emissions. Tractors I'm considering (with HST) include: L3200 L3240 L3540 L3560 (my first choice if I could afford one) L3800 L3940 Are there any of these that...

Wow, I was excited after reading Wolfman's suggestion about a Woods FEL. I immediately called my local dealer, and was quoted "approx $6,000 installed"!! Does that sound in the ballpark of a decent price?

Seems all my options may involve sizable $$$! 1. What are the pros and cons to adding a Kubota FEL to my L3010? 2. Pros and cons on aftermarket FELs & brand to purchase? 3. If I go the replacement route with a used Kubota w/FEL......is there a way to verify the hours on the meter? Thanks for...

I've noticed a slight hst fluid leak. I can't determine the exact origin of the leak, but it appears to be near the Hyd filter (HHTAO-37710). However I'm thinking if it was the gasket on the filter it would drip from the lower part of the filter (horizontally installed). It appears to be...

Problem Solved…….The issue was solved with a starter relay #35800-75070. Thanks to those that responded with suggestions and help!! Great forum!!

Thanks to all and Wolfman……..looks as if I'll bite the bullet, and go the printed route!!

Looking for a cheaper alternative to the printed shop manual.

Thanks, I'll look/check that fuse…….also have a starter relay due in today, hopefully i'm closing in on this!

Connections at the starter are secure………getting good voltage to the starter, still searching.

Just had the battery checked, and it checks out fine. I cleaned all the posts and ground to frame, and this time I have dash lights, but when I try to start it,, it's only one "click" and then no more dash lights. Still hoping for a solution.

After finishing tilling yesterday, pulled the tractor in the shop, and the key would not kill the tractor…..so I pulled the "engine stop knob"……killed the tractor. Then will the engine stop knob pushed in, I tried to start the tractor, and noticed no dash lights were on, and the engine would not...

I pull a 6' rotary cutter with my Kubota, and I've seen some folks use what I call support chains to take the load/stress off the lift arms (attached to the frame of the mower running to a fixed point on the tractor). Is this a good thing or over kill?

I've just performed the maintenance of replacing the transmission fluid (600 hrs), and since new have never removed/cleaned the Transmission Strainer. I removed some linkage, and also removed the spring that controls the foot speed control,(this still leaves the linkage blocking the removal)...