Search results

  1. J

    Bx22 starts but shuts off in ON position

    At this point. I'm not 100% certain. I replaced the solenoid with aftermarket without luck, kept that installed and replaced aftermarket ignition switch with no luck. Kept the aftermarket ignition switch and put in new oem solenoid which did work. Since it works, I'm not touching it! The...
  2. J

    Bx22 starts but shuts off in ON position

    Success! OEM solenoid did the trick and I'm back & running. My final diagnosis (with lots of help from all of you): Original OEM solenoid failed and blew 20amp fuse. Aftermarket solenoid did not function properly, combined with using original solenoid to diagnose & repeatedly blowing 20amp...
  3. J

    Bx22 starts but shuts off in ON position

    Ok, sorry for the delay, I wasn't able to get back to my garage until this morning. Thank you all for the help and the link to the diagnosis book, very helpful. Still not working but I understand the problem better. Part of my issue is that I confirmed the old oem solenoid doesn't work...
  4. J

    Bx22 starts but shuts off in ON position

    Yes, it is the bx22 tlb. I did see there is a lever adjacent to solenoid that pulls the shutoff rod in (not the solenoid prod, rather the rod that is activated from the solenoid). So technically I COULD remove the solenoid and replace by a string....but really looking for a fix and not short...
  5. J

    Bx22 starts but shuts off in ON position

    Is the 30 fuse somewhere separate from the other sets of fuses? I checked the 6 or 8 fuses (one of which repeated blew), don't recall seeing a 30amp fuse though
  6. J

    Bx22 starts but shuts off in ON position

    Bx22, 500 hours Read a few similar threads to get me started, starting issue is related to fuel shut off solenoid. Engine starts but shuts off when key moved to ON position. Per suggestion I replaced solenoid with aftermarket, found fuse blown and replaced that. Tractor runs when solenoid...