Search results

The letter we got from Kubota, Kubota appreciates the many inquiries from employees and dealers regarding the devastating effects of last week’s earthquake and tsunami in Japan. As of March 14, we are aware of the following Kubota-related operations and employee news: * Kubota Corporation’s...

2350 w a 48" tiller should not be a problem, is it clay? has it been tilled before or fresh ground? maybe till at 4" then do the 8"

http://www.orangetractortalks.com/forums/showthread.php?t=4055 Is this the same tractor your talking about here?

ABR8736 Front 23 x 8.50 -- 12 TURF $148.00 ea ABR8779 Rear 33 x 12.50 -- 15 TURF $294.00 ea From the dealer plus shipping I'm sure, but this is probably the cheapest way new. I assume you mean B7610 not B2610 like in you title

Have you actually tilled with both to make this statement? I have and the reverse rotation has almost no bounce and tills in half the passes or less even in fresh soil or sod. jmo

The letter we go from Kubota, Kubota appreciates the many inquiries from employees and dealers regarding the devastating effects of last week’s earthquake and tsunami in Japan. As of March 14, we are aware of the following Kubota-related operations and employee news: * Kubota Corporation’s main...

Your delivering dealer should have a set up check sheet filled out and you get a copy, it has everything on it right down to tire pressure, but it would not hurt to look it over while they are there.

You need to spread the roots out, for the shrubs you won't need them that deep which with 18" to 24" you can only go the depth of the flights, now a 12' tree I would have a spade move those I think it is a foot of hole for every inch of trunk.

Sounds like it to me, how about rear remotes and a skid steer quick coupler and HD bucket?

D950-FM and parts should not be a problem, what are you looking for?

Bump ttt:d

agree. http://kubota.com/safety/RolloverProtectiveStructures.aspx .

we had a customer that used furnace oil and plugged everything solid, I think the muffler weighted 100 lbs, It ran on it for a while, personally I wouldn't

user CP then edit options then messaging & notification then default subscription thread change to instant e-mail notification .

There is a difference in shipping and actual weight. The KK list "shipping" weight of 290# The LP is "shipping" weight of 355# actual 319# I have seen people bend and break blades on the KK but have never seen one bend or break on a LP. John

There is a seal in there that leaks but I have see bad bearings and seal bad when taken apart.

Model # L2800HST-1F 3 Cyl. 91.5 cu. in. 28.6 Net Eng. HP 23.5 PTO HP @ 2800 Eng. rpm But if you can get it for 16,450 out the door that is a good price (old stock?), is that with a Kubota loader?

For your new price that must be a B series and that will not run your 6' equipment, That L4610 is a good price for the hours "IF" it is not all beat up.

I handle Woods stuff and you looking around 7500.00 for a loader to fit a L4200 they have 3 different models for it. LC96, LC102 AND LC108 http://www.woodsequipment.com/loaders.aspx?id=12123&ekmensel=41a6502d_21_0_12123_6

A welder and a torch and a lot of fab probably may fit but that loader is for the M series so no it won't just bolt on.