Search results

Since the LX3310 uses a DI (direct injection) and not a PC (pre combustion) motor. It does not use glow plugs but rather an intake heater grid between the throttle valve and the manifold. It probably is controlled by the ECM and perhaps it's not being commanded on. You can check the resistance...

I sold my 2004 B7510 with loader and 60" MMM had about 950 hours on it for $13,100. Ordered the LX2610 to replace it on 9/10 The tractor just showed up to the dealer this week and the loader is supposed to be in Monday. Because of the equine discount the new one is only about $7k more and has...

Go back to the basics... If the valves are now opening then check to see if you have air moving into the intake and out the exhaust. An engine works like an air compressor If the valves are opening Turn the motor by hand and make sure the intake is opening on a down stroke and the exhaust is on...

The big difference between the LP grapple and the EA one is that the EA grapple has serrated teeth to help hold what ever you grab better without it being able to slip out as easily. But it is a 6 month wait currently for a EA grapple...

On my old B7510 it was drivers side. I used the Kubota block heater part # 70000-73274 It is the same thread as the freeze plug. When my LX2610 comes in a couple of weeks I plan on putting one in it. Not hard to do and cold starts on a frigid day are the hardest thing you can do to a motor....

You use a 17mm hex bit socket to remove the threaded in freeze plug on the left side of the block. No drilling required.