Search results

Definitely needs a hose going into the cab!

Yes, The weight in the box is centered on the eyes in the 3PH lift arms. It is not hanging off the back. Since it ids an old beer keg I've always wanted to run a hose from the keg into the cab just as a joke. I will try closing the valve. Thanks

Yes, I kind of remember that, I'll have to try that. Thanks

It's actually a home made 'box', a beer keg. The BX2200 is rated to lift something like a 1000# on the 3PH

I have a BX2200 and use a weight box on the rear while plowing. Sometimes I hit the lift lever by accident and the weight box falls. I see there are places to hook the lift bars to the tractor and not the lift. If I just moved the lift bars over, the weight box would be too low. Do they make...

Back in '18 we went through Canada to Alaska. Our friends took this photo of us which I think is in Banff National Park

And don't forget to pay the $25 missed appointment fee

I agree, just wanted to get the leaves done that day. Will be cleaned this weekend

I was doing leaves and of course it started getting warm since the radiator was getting plugged up. Not wanting to stop and clean the radiator while it was hot and after some consideration, I turned the heater on. Cab doors off for the summer, so not problem. Temp stayed in the black!

Yes the plastic shoulder should go through the panel. It is also important that the spikes on the bottom get grounded to the metal panel. An antenna relies upon the mast as one side of the signal and the ground plane as the other side of the signal ( something I learned in college 57 years ago)

Bruges Belgium at night

Helps you find the keyhole if you've had a few too many

Fuses blow by getting hot. A 15 amp fuse should blow within 90 seconds if you are drawing 16 amps through it ( approximations. check the fuse specs) The same 15 amp fuse would blow in less than a second if you were running lets say 50 amps through it. Since in your case it takes a while to...

I lost my first wife to cancer. I no longer had someone that said I shouldn't buy.... So I went out and bought a back hoe attachment for my BX.

Hopefully it is just photoshop!

Bob, he's been gone for 12 years, but a great dog. He was a home body - absolutely no reason to leave home, no rides - nothing. We had a fenced in back yard, he would dig under the fence and run around to the front of the house and bark to get let in. We still miss him.

We moved into a new house and during the move, the doors were all open. Finished moving stuff in and the Jason ( a Shepard mix ) was no where to be found. We called for him and searched the neighborhood - no Jason. We finally closed the doors and checked out the house. There was Jason curled...

All of these comments about trenching machines are great, but what to do about the water table. My water table is at about 4', that means I'd have to work 6' under water.

If you are 1" below frost line, you are not deep enough. Geothermal relies on the ground being about 50 degrees.

At 6" wide, you still have to put sand down, the pipe, and more sand. You're working at the edge of a 10' trench that could give way. If it was digging through granite, do you really think it would be much cheaper than a well?