Search results

My L235dt got like that this summer, I changed the fluid and it got better. Mine had a fair amount of water in it when i drained it. Not really sure if that had anything to do with it but ..................... I just used the wally world udt fluid

mine has a filter its like 20 bucks i just put a new one on

Well I cant find this screen on my tractor either - I just changed the filter and filled her back up with wally world UDT Seems to be working fine but if it has a screen i would like to clean it., my fluid looked like sewage when it cam out - so for 45 bucks im going to change it again...

I have been wanting to do this since I got the tractor and finally got around to doing it. A good friend, welder, 4 hours and some scrap metal - whaw -la canopy ! I emailed Wells AG yesterday cause I was going to buy one of theirs but they dont have a dealer near me, so we made one ! Here are...

how do you think I feel - i have the "even older" L235DT ! The only thing I can find out about it, is that, - it should last me for ever and everyone that has had one, like it ! im sure the 2350dt is the same thing - but newer and better ! haha

Truth be told i was getting ready to blame my boys for messing around with the tractor - then I remembered that I did it !! Good thing i didnt jump their case !

Well I get the Homer Simpson "DOOOHH" AWARD ! When I was filling the trans fluid back up I moved all the levers near the fill hole out of the way to make it easier to pour the 5 gallon bucket of fluid in fill hole- one of levers being the 4x4 lever. Well I didn't put the tractor back in 2...

no leaks whats so ever on this tractor. I guess I will run it for a bit and see what happens. I guess I wanted to make sure that there was not anothe fill port for the rear axle on this machine - does not show one in the manual. Should I consider going back to the thinker fluid ? I...

So I live with it ? The machine only has like 600 hours on it. I ran it down the lane in road gear - rears didnt get hot or anything so ............... motor on i suppose?

Hey guys I changed the hydraulic fluid/filter in my L235 DT - The fluid that came out was nasty brown milky color. Im guessing it was filled with water. I filled with 6.5 gallons of udt per the owners manual. Let the tractor sit an idle for a bit like it says to do . Now there is a whine in...

where is the strainer located on the L235 ? I also have a leaky 2 lever valve on the loader - I am ordering a new one (single lvr) from northern tool. Is the L235 a open or closed valve set up ? thanks for the quick response

I have a 85 L235 4x4 fel. I mowed some pastures today and my trans got really hot, it is full of fluid , maybe a hair over filled cause this machine has the sight glass instead of a dip stick. This tractor is new to me and may be this is normal. I did notice that toward the end of the day my...

Can I get wheel spacers for my l235dt ? to make it just a bit wader in the front ? I have heard about swapping the front wheels but they are not smooth on the out side to fit against the hubs any ideas ?

Thanks Vic, I have welded up a 2 inch receiver hitch that bolts to the 3pt drawbar and is braced at the top with the top link(like the ones on ebay) My concern was pulling heavy loads such as trailers with firewood etc etc. with the 3pt draw bar. I was under the impression that I...

well after some more digging, i found out that the swing draw bar assembly shows up under the l275dt parts lookup. At the cost of 600 bucks I think I will fab my own !

I have a circa1985 L235dt my tractor has a hitch that looks like this I need one that looks like this The dealer doesnt show one - but my owners manual does Any ideas ? I am using this tractor for hauling firewood and would like to pull with the hitch verses the 3pt

Hello, I am the new owner of a L235dt w/fel (circa1985) I think I need advise on what size bush hog and rear blade to get for this machine. 5ft or 6ft etc etc Thanks