Search results

  1. kc8fbl

    B21 engine oil

    I would say to use the T6 5W-40 all year round. The added benefits of using synthetic oil is worth the extra costs to me. I used it in my B7610 and it was great. Started up great when it was -20F last winter.
  2. kc8fbl

    5030SU injection pump failing?

    Make sure you're getting a good flow of fuel from the tank down to the pump. I'm pretty sure you have a lift pump before the injection pump. Check and make sure the return line back to the tank is not plugged. Another check would be if your fuel cap is properly venting. When it acts up, loosen...
  3. kc8fbl

    50 Hour Servoce, L3800 HST Quieter??

    I've heard quite a few people on here that have changed the transmission oil to SUDT-2 has made the hydro whine go down quite a bit. I would say you have nothing to worry about. ;)
  4. kc8fbl

    B2620 LED Headlights

    Do you have a dim and bright position on your switch? I'm wondering if they would be any brighter on the bright position?
  5. kc8fbl

    Considering a B2650

    Someone will correct me if i'm wrong, but I thought the 2650 didn't have a DPF on it? I thought it was anything over 26 HP. There are a couple people on here that have the 2650 and i'm sure they will chime in. I'm sure that tractor will do anything you ask of it. If you can find one still...
  6. kc8fbl

    Gear oil New Bushhog ?

    Is it a new or used brush hog? If it's new, I would guess maybe some fine metal shavings possibly? If it's used, maybe some crud from the previous oil that was in there. I know 85-140 oil is pretty thick, but i'm not sure it should have a jello consistency. I might would try maybe running it...
  7. kc8fbl

    B2620 LED Headlights

    Those look really neat, and I can tell a difference in the pictures you posted. Great job! I wonder if that is the same bulb as what would be in my L3200?
  8. kc8fbl

    Kubota L305DT Secondary Clutch Adjustment???

    Has it set outside or not used for a while? I'm wondering if the clutch is sticking a little? Welcome to OTT and I see you're not too far away either! ;)
  9. kc8fbl

    M9540 ac

    Is there any AC filters in the cab? Those could possibly be hindering your cooler air flow.
  10. kc8fbl

    Buy a cab for M7040

    I would call your local dealer and inquire about a cab. It will fit properly and shouldn't be too bad to install possibly by yourself with the proper lifting capabilities. Good luck!
  11. kc8fbl

    B2920 -Close to pullin the trigger

    Nice looking tractor. That tooth bar looks mean on there! ;)
  12. kc8fbl

    FEL on compact

    My dealer had mentioned to me to check your tire pressure and keep it up where it's proper PSI should be. If they go too low, you could get one of the front axle seals to start leaking. I haven't had any problems with mine. Just keep tire pressure up and don't overload them with trying to haul...
  13. kc8fbl

    PTO Shaft Grease

    On my finish mower, I just disconnect the shaft from from the rear PTO and let the shaft hang down. You can then tilt the knuckle so you can get to the grease fitting. May have to manually turn the shaft to get to the fitting though.
  14. kc8fbl

    L3800HST price check

    That is pretty much the price I was quoted here in SW Michigan. It can vary on areas and possibly be a little more now since people are looking hard to find a tractor without all the Tier 4 emission stuff. Good luck! The L3800 is a great tractor.
  15. kc8fbl

    OTT gathering

    That's great to see! I've often considered trying to set something up in my neck of the woods. They used to do that on an old Jeep forum. Was a ton of fun! Too bad we couldn't drive our Kubotas to them! :D
  16. kc8fbl

    Pics From Dealer

    I think the M's are sharp too! That is why I got my L3200. I wanted to beat the DPF stuff and the extra cost. ;)
  17. kc8fbl

    Pics From Dealer

    Mine has some of the new hay equipment. They seem very nice. I didn't see a single "B" series tractor there either, but they must be selling like hot cakes since they had quite a few there a couple weeks ago.
  18. kc8fbl

    L3800 PTO Don't Shut Off

    That must be. On my L3200 HST, the PTO engagement is on the right hand fender.
  19. kc8fbl

    L305DT rescued from the salvage yard

    Looks great! Looks better than sitting in the salvage yard for sure!
  20. kc8fbl

    B3350 dpf issues

    At least with the 2650, I believe there is no DPF stuff to worry about. Glad to hear that your dealer is willing to do some investigating on the problem and trying different things to try and make it work. Hopefully things work out for the best.