Search results

Lights, Front draw bar and dring to recover the tractor from the front. Also great for securing to a trailer.

Kubota l2501. Sounds like a metal rod smacking the bottom of the floor board. Sounds like a spring loaded metal rod released and smacks the bottom. I heard it quite a few times within 50 hours. No ideal what it is.

Hello everyone. I found a set of turf tires and rims off an old Kubota L2000 size 13.6-16 Does anyone know what size turf tires on the Kubota L2501? I am trying to figure out if the tires and rims from a L2000 will work for my L2501. Thanks

And the arrow is pointing to So the dealer I purchased the mower from was correct in saying that the shear bolt yoke go to tractor end.

The driveshaft has a label that indicates which side points to the tractor.

Here is the Implement input guard cone that came with the mower. See how the shield steps down to a smaller diameter? The knuckle on the shear bolt yoke hits where it steps down and will not allow the shaft to slide on far enough to lock onto the gearbox. I need a cone that doesn’t steep down...

Thanks for the advice. I do not know what to do. I was thinking about removing one of the safety shields but after watching the video I changed my mind. Does anyone know where I can get the correct size shield? I can find places all over the world who sells them but no where in the United...

I also thought that the shear bolt should go on the implement end. Most everything I have seen was set up this way. Shear bolt or slip clutch on implement side. Yes it is a brand new Chinese flail:eek: Yes the flail mower came with the PTO shaft and the shaft was manufactured by ARGI-MACHINERY.

flail mower.

If I install my driveshaft with this shear bolt yoke on the gearbox side it hits the plastic cover and will not lock into position. If I install the driveshaft with the shear bolt yoke on the tractor side it hits the metal PTO cover. What do I do?

Guys he didn’t hurt that tractor. Most people don’t baby there tractor like you guys do. It is a tractor! You guys think that is bad you would shit your self and grab your orange touch up pin if you seen me bulldoze through the woods knocking down trees with my little L2501. My tractor is for...

Thanks everybody for the advice on the trailer brakes. I got them hooked up yesterday and WOW what a difference. When stopping it’s almost like there is no trailer behind. This is my first trailer with brakes and I am glad that I spent the extra time and money to install brakes on the trailer...

Thanks for all the advice on my project. It is not done yet but I figure I will give you guys a better look at it. This is the first trailer I’ve rebuilt so please let me know if something doesn’t look right so I know better next time. https://youtu.be/993RyYEFJRI

Yeah great ideal because I always knock them off and the lights on this frame are sticking out of the side pretty far and are asking for me to knock them off first time I use it.

Thanks Kenny. After I did my research I found everything you said to be exactly what my research turned up.

Thanks everyone. This forum has been a great help. One thing I would like to point out I found from my research. PT “pressure treated” wood since 2004 is VERY highly corrosive to metal. If you use PT you need to use stainless steel fasteners. After doing my research I have decided to go with...

I thought about using 2x12’s so I will need to use less stainless steel carriage bolts to hold the boards down. Most recommend 2x8’s is there a disadvantage using 2x12’s?

Lots of hard work and lots of money got me this far. I need to install a deck. Question is what kind of wood? Pressure treated or just regular wood?

I did into the side of a mountain with my l2501 containing nothing but rock and clay and have not broken anything yet! When it gets too hard to dig I point my bucket down a little and scrape the soil to loosen the soil. You don’t want to point it straight down. Not quite 45 degrees.

I went down to tractor supply and a 5/16 chain hook will not fit through a 1/2 shackle. I am glad I found out before I received my order. I had to cancel the order and order bigger clevis mounts. Thanks for the replies. I am glad I went down to the store because I didn’t realize how small a 1/2...