Search results

I believe that Kubota makes the plug connector for your tractor, it plugs directly into your existing harness in the rear. I know for the M series tractors they run about $30, cheap and easy way to get your power to your trailer. If the tractor is idling then it will charge your dump trailer...

So when I bought my tractor it had a Sims cab with it, the only problem was that these cabs mounted directly to the fiberglass fender in the rear and the whole back of the fender was broken off. So after I had the fender repaired I was not going to bolt the cab to it again so I fabricated a...

I wanted to update my snowblower for the chute rotation and the articulation for changing the angle of the shoot. So I ordered an actuator and I had a spare motor for an RV jack. I started off by welding up a bracket to hold the motor and I fabricated a new rod to attach to the screw drive, I...

You did a beautiful job, there is one part that brings down how nice of a job you did. it is your airbox cover. where it has oxidized. If you take a heat gun to the cover you can bring it back to black. You have to heat it up for a minute or so move it around in a circle then work out once...

Thank You , I looked at buying a G1900S I thought they were nice tractors, the seller sold it in one day. too bad they did not offer a blower for those. 18hp is pretty nice in a garden tractor nice machine. Enjoy

GSmith I am interested in two of the drag links you have. please let me know how much you would like for them? you can PM me.

Thank You it was a lot of fun, worth it too. I have a nice tractor for short money and a little time. I have about 25 hours into the rehab. and about 8 hours into fabrication for modifications and new parts.

You did a beautiful job on that. That came out a lot nicer than when it was new. It is very satisfying when you finish a project like that. You should try an automobile for your next restoration if you have not done one yet. You have the attention to detail for it. really nice work. Now go...

We are there. So now for the meat, it you made it through all the pictures you were probably wondering how much I paid for it and what I have invested. First though, the cab is a sims cab and the mounting was directly on the fender. Poor design this caused the whole fender for crack off in the...

We are getting there, You can see the detail that went into refurbishing all the body parts. I put 4 coats of kubota orange. And Yes I know I used the wrong orange. To paint all the parts I needed a gallon of paint and to get Kubota orange 1 it was going to cost me around $150 with shipping...

More Progress, Here you can see I have the motor back together, I painted all the engine, intake and exhaust. I also repainted the silver on the dash to accent all the works and raised ridges.

Process through the stages. The mower deck only had minor repair on one of the top panels, I had to weld on a new edge to bolt it to the deck.

So I bought a g5200 this summer. The mower had 1130 hrs on it when I purchased it. It was rough, but had really nice bones. It came with a Sims Cab, G2500 38" single stage blower with hydraulic lift, 48" mower deck. The tractor is also set up with hydraulic deck lift and front...