Search results

I'm truly understanding the relationship. If foaming is happening, will it fix itself over time or does the system need to be purged? I know my power steering on my truck was messed up after the changed the pump, they didn't suck all the air out. I had to get a vacuum pump and use that...

I have some clarity on this now, there are two hyd circuits, one controls the motion, steering, and bucket. The 2nd controls the 3pt. So, does that mean they are not connected in a series, can the 3pt operate or not operate independently of the other 3? This would explain why I was able to...

#10 on the drawing is the Hyd control valve for a backhoe, not the 3pt. #21 is actually the hyd control valve for the 3pt. Just so we are comparing apples to apples!

Again, I AM NOT A TRACTOR MECHANIC. "I fought you over the clutch", how about I pressed you for information because I DID NOT UNDERSTAND. I AM NOT A TRACTOR MECHANIC, the parts breakdown made me assume there were two clutches, Then some other guy thinks I have been "Shifting" by using my duel...

Do I dare say I don't have a backhoe?

Can you show me where the 3pt hyd control valve is on this drawing, please? I am referring to item 10 in this drawing? 010 ASSY VALVE, CONT- ASSY VALVE, CONTROL YR906-00107

I'm not sure what you want me to say so we can get pass this? "If you've removed the valve or left it leaking it 100% just dumping fluid (bypassing) in an uncontrolled fashion. And you don't see the bypass because it just dumps the fluid back into the sump." If you would like to say it is...

Did you start at the top? Did you jump in in the middle and only address what you think is wrong with the way the post is posted? Isn't smart to start at the beginning so you don't miss important information?

Absolutely nothing! 3Pt is not in a "LOOP" with the rest of the system. It operates independently of them. There is no bypass, no hose patched in, no lines capped, no ports plugged, nothing. The hyd control valve (010 picture 2) only operates the 3pt. it was stuck inside the case by the 3pt...

The valve is above the main resorvor. if, which I don't belive it dose, buy fluid would just recycle. But, before we spend a bunch of time on this, trust me when I say, there is no bypass or anything I had to do to keep the tractor doing everything else. It is independent of the other functions...

Wolfman, I understand what you mean by bypassing the system for the 3 pt! The hyd system on the tractor is not what I would call a closed system. As in if you open one of the four you would need to bypass it. The other 3, Steering, bucket, and travel all function fine without the Hyd Control...

The 3pt issue never effected operation of the tractor other than I could no longer raise or lower the arms any longer.

SDT, Obviously, you didn't read the original post. I repaired this tractor after it was broke in half, do you honestly think I would not know it has duel braking? Would I have bought a tractor and not known what the two pedals are for on the left? When asking about the clutch I am refering...

Friend just had his old tractor worked on, 3 pt wouldn't raise the tiller anymore. Found out his filter was clogged. Could my problem just be a filter issue?

I believe, but not 100% sure the 3 pt is separate from this. Yes, the same pump services both motion and 3 pt operation as well as the bucket and steering. I know my Hyd Control valve for the 3 pt in not working. That's a separate issue I am going to deal with when I open the case up. The...

Yes, as the problem got worse the bucket slowed a bunch.

LOL, Like I said, I can fix anything but I'm not a tractor mechanic. So, I haven't fired it up to check the PTO, I will do that tomorrow.

What clutch is this? C40100 CLUTCH HOUSING

Then what is the clutch for on my 2601? I see a PTO clutch but there is also a larger clutch.

Yes