Search results

Wow. They get big so fast. I always tell everyone with a puppy to enjoy every minute because they soon grow out of that stage. Enjoy!

Nice van in beautiful shape Lynnmor. Years back the wife and I were snowmobile fanatics. She had weekends off and sometimes I had to work. Kinda foolish for her to drive a truck and big trailer by herself. I bought her a cheap 2000s GMC delivery van with a kazillion miles. With a cheap atv...

If that were mine, I would follow suggestions as posted. Then make up another hold down bracket that would go around the tube and fasten with the same bolt, on top of the original bracket. May need a longer bolt? Something like a distributor hold down clamp of the old days….😀

I have had a different problem. While reading posts, screen goes white, then post comes back. Then I get an error message of some sort and get kicked out of the forum.

I agree with PoTreeBoy. From your description of the symptoms, It sounds like your starter is not spinning the engine fast enough. That is why I suggested a poor ground somewhere in the circuit. It’s possible a poor positive connection is also the culpri. These are tough to diagnose over the...

Try running one booster cable from the negative terminal on the battery to the starter framework…also negative.

The spinning surface should be against the pressure plate fingers.

Thank you for your detailed post. Yes, I live in the country as well. I cut about 1.5 acres. Some wooded area, and along a creek and wetlands, and some along a road edge which is steep. I always managed to cut this slope with my old cub cadet rider, and could easily shift my butt to the...

I cut 3 or 4 passes along the road edge, can’t go straight up and down.

I too have a Ferris. ISX2200. Same oil system as yours. In your opinion do they hold cutting a slope better than the turfs? How about turf damage? I know the inside tire, no matter what tread will shred the lawn if the operator spins around on a dime, but how is it for 3 pt turns or gradual...

Just bought 80 pressure treated 2x6x8 ft. Nearly 15 bucks a piece!!! 😩😩😡😡. And some are twisted…..which I definitely will be returning at that price…

Yep. Love my zero turn. Spots where I must turn are always missing grass from the inside rear wheel. Still learning and getting better. But I also have some steep slopes that I haven’t attempted yet, and get out the old cub cadet tractor to do these.. I’ve considered some higher grip rear tires...

Being on sandy soil, my atv shreds my grass on turns. Most likely due to the solid rear axle. Do these tires rip up the grass on turns.? With my zero turn, I avoid zero turns when cutting cuz the turf tires do a little damage.

Suppose I should have asked if your well was a dug or shallow well vs a drilled deep well.

My first thoughts are to check the well and depth or height of the water as compared to the pick up line and foot valve. Your gettting air when showering….or higher consumption of water. Is your well water level running below the pick up or foot valve and thus drawing air in? A foot valve is...

Thanks for sharing! Nice to read and see. Good job.

Great pictures everyone. Congrats RCW on the new family member!! 👍👍👍

Just some screen captures from my wifi cam I’ve been moving around.

AM could be the run?

Great shadow in the second pic!