Search results

  1. hope to float

    Pond problem, algae bloom

    Has anybody tried straw bales?
  2. hope to float

    Notice they sent the Ford in first 💪

    Have they no trailers they could have sent in?🤯
  3. hope to float

    Transmutation

    I can't figure out how it crossed it's wheels before the change
  4. hope to float

    Show us your Shop and Equipment

    Are some of the 427 hammers metric?
  5. hope to float

    L2850 FEL park stands missing

    Just to add: If the seals in the rams allow your bucket to drop you will need an additional prop under the front crossmember where it bolts to the tractor. Otherwise it will lower to the ground over time and be a little awkward for re-attaching. I just use a piece of wood
  6. hope to float

    Firewood challenge! Loading a 40 yd bin by hand

    At what distance does it make more sense to carry 5/6 logs (armful) to the trailer as opposed to throwing two at a time for the full distance?
  7. hope to float

    PTO Shaft cover removal

    The tab shown in the pic pushes straight in towards the center. Taking the cover off is easy enough, getting it back on can be a bit of a fiddle. There should be a grease zerk on that collar to lube the plastic bearing where it spins on the shaft
  8. hope to float

    What is this........?

    The fact that it was damaged suggests, to me, that it served it's purpose at least once
  9. hope to float

    What is this........?

    I suspect it was put there as a safety feature so that you cannot dump the bucket if someone is working from a raised platform, such as a pallet on forks
  10. hope to float

    Flip - flopping R1 front tires - Cause internal damage? - See pics.

    The outside of the tyre will still be the outside of the tyre, just backwards, if you just swap the wheels. Unless you are planning to mount the wheel inside out. I don't know if this can be done on the front
  11. hope to float

    What did you do to or on your Kubota today?

    The reason Kubota didn't make it an option is because it can be dangerous. You will be operating in a crush zone. It's a nice tidy bit of work but be careful back there!
  12. hope to float

    New Yard Toy- Old Cushman Truckster

    Drove a 4 wheel one for years. Great work horse but gets stuck surprisingly easily
  13. hope to float

    Daily Chuckle

    Except they would be barefoot
  14. hope to float

    Daily Chuckle

    There is a song about this! Look up The Sick Note
  15. hope to float

    Lifting 5gal cans of diesel fuel a problem

    If you have pallet forks you don't really need a pump. Mount the delivery pipe low on the side of the tank and just put it somewhere high and let gravity do the work
  16. hope to float

    PTO shaft too wobbly?

    It seems that you have lifted the mower too high with a long top link and caught the middle of the shaft with the front edge of the mower. And yes, that'll bend your shaft.
  17. hope to float

    Fuel prices

    It's around €1.90/litre here. Luckily, I drive a fairly economical van. I've had it for a few years now, maybe 12. I was passing the time in traffic last week when I noticed the mileage. Even I was surprised! Not bad for a 15 year old van with over 300k km
  18. hope to float

    New to the forum and begging for help from people that know more.

    Don't know if your tractor has one, but did you or anyone else pull the "pull to stop" button. The odd time my sister borrows mine she does that and I'm sitting there cranking wondering why it won'tstart
  19. hope to float

    What did you do to or on your Kubota today?

    About 8/9 hours. There's another one behind the tractor and another 1 to start, and 4/5 smaller piles around the place. Best €500 I ever spent
  20. hope to float

    What did you do to or on your Kubota today?

    Well, I learned not to let the pile build up until the chips get into the drive roller and knock the belts off 🤦‍♂️