Search results

It looks the same. That is the fitting I read was needed on the website but I’m not 100% sure.

None of the threads look damaged. I stippped off the thread lock stuff. So just degrease and re-install?

I got I need to remove, clean and reinstall all this. What is over tightening? I may have done that already.

This is what I put on it. There are two connections that just screw together in the circled part. One of them, possibly both are leaking on all for lines.

Ok, I used a thread lock that was specifically for hydraulic lines, they are still leaking. What am I doing wrong? I’ve got a road to fix but I don’t want to use my tractor until this leak is fixed. As far as I can tell, all four connections are still leaking. Do I just need to wrench them down...

I did not. That is probably the issue.

The parts are correct. It just seems they are leaking a bit. They are on extremely tight. It doesn’t seem to leak until I start working it. When I was scraping it leaked. I cleaned it all up, tightened it all up, and it was fine until I started scraping again. Two passes, and I had hydraulic oil...

So about a month ago, I did what I read a lot about and replaced the BX hydraulic connection with four individual connections. I ran it once since then. No problem. I used it today for some back scraping for about 45 minutes. It’s leaking every bit as bad as it was before. Where do I go from...

I get that done if yours last a long time. I take my bucket off regularly because I mow my grass with my BX2380 also. I could mow with it but I’m pretty sure I would take out some trees and damage a car at some point. I would bet if you took your bucket off four or five times a year, it would...

Maybe not but Kubota sells it on all the BX tractors.

Why do you say that? I’ve read a lot about it. It seems this part is known for leaks.

It sure felt good to be done with this turd of a part. Got some decent, and much less expensive parts on there to replace it.

Ok, thank you all for the responses. I’ll see if that does the trick.

I’m saying I physically can not turn the dial to the “top” setting. 1-4 is fine. I can’t got from 4 to top or from 1 to top. The dial won’t go. The deck is fully lifted when I’m trying to do this.

For some reason I can’t get my mower deck to lock in the top position. I just did all the maintenance on the whole tractor. Put the deck back on. Mowed with no issues. It just won’t lock up. Any ideas?

Ok, I know it’s supposed to pivot there. It just seemed a little extreme to me how easy it shifted side to side. I thought it should be tightened up. Glad to hear I don’t have more work on this thing in my immediate future.

I was servicing my BX2380 yesterday. I put the front up on ramps and began to use a floor jack on the back in the center. The tractor started tipping over. It wasn't high enough were in was dangerous or anything, but I found that odd. I pushed the tractor back to the center and it tipped the...

So do you generally replace the top, bottom or both?

Does anyone have info on this?

I saw a YouTube video where someone did exactly that. Would you happen to know part numbers for that? I think I need to do that. I’ve not read anything good about the Kubota coupler. It seems like the main point of contention with this tractor.