Search results

Patience is a virtue. I think Craigslist has been quiet with all of this Covid 19 and similar issues. Just keep looking and act fast when you see what you like, good used equipment sells fast in my area. I think you will see a lot more activity in the next 60 days. You can really save some...

I just looked under my tractor. You are not going to need a thin wrench. There are two nuts on the switch you can get to the nut closest to the main switch body with a regular wrench, just loosen this nut and you will be able to move the other nut with difficult access with your fingers. If...

Yes Demco does make 3pt sprayers but only serious ones, I think they start at 150 gallons. It seems that sprayers are in some ways consumable items with many of the cheaper units on the markets, I'm not saying that is bad but as a buyer and user you have to be aware. I avoided PTO sprayer as...

HP Recommendations for rotary cutters are normally PTO HP. What are you planning to cut with your rotary cutter? If you are planning to cut light brush you will be fine, as you move to cut heavier material your HP limit will show by the cutter possibly bogging down, you will have to cut at a...

I use an electric 60 gallon unit on the back of my UTV (Polaris Ranger 900) to cover a mixture of wood edge, small open ground fields and lots of woodland food plots, similar acreage to your description. The UTV is easier to handle than tractor in rough ground and can be ran slow when spraying...

I don't have any experience with this brand and from looking online it looks like it is a more recent brand. My suggestion is that you select a brand first based on a product that fits your needs well and secondly on the basis of support and spare parts. You comment that this brand is more...

I have a 2011 HST L3200 and a HST L3901 (recent purchase). I looked at the L3301 but the upgrade was not a lot more money for the extra power. A lot of people comment about buying the L2501 due to the pollution requirements. I never worried about this on my L3901, I wanted a little more HP than...

It sounds as if you have a primary and secondary air filter installed, try removing the inner safety air filter and run the tractor with the air intake cover off, so just using the main external air filter, your light should go out. If the light does not go out your sensor switch may need...

Can you be more specific, do you just have rear wheel drive? Have you checked the transmission fluid level? How many hours on machine since last transmission fluid service. Transmission filter change required ar 50 hours, 200 hours , 400 hours etc. Fluid change every 400 hours. Have you...

It sounds like you have all the parts other than the bolts and washers. Order new bolts and washers and have someone who knows what they are doing reassemble the fan to the water pump using correct torque and some loctite. Good luck with it.

REAR STABILIZERS ON 3PT Arms I always struggled with the rear stabilizer links and turn buckle on the lower 3pt arms of my first tractor an L3200. Adjustment was difficult and cumbersome. I later purchased a MX5800 and was amazed at the wizardry of telescopic stabilizers that were adjustable...

I tried loosening the HST filter when I overfilled my L3200, the problem was that fluid level only dropped by a filter full, no more fluid came out from HST filter area! I needed 1 gallon out. I solved my issue by having a friend start the tractor at a low idle with the HST filter cracked about...

Wiring for ROPS model Good luck with problem.

I was just solving the same issue yesterday on my L3200 after changing the hydraulic fluid and filters. I looked up the capacity and put in 7.2 gallons but could not see any fluid in sight glass. Turns out 7.2 is for manual gear model, my HST only takes 6.2 gallon. I backed off the hst filter...

Greg, I just purchased a new Kubota machine, after looking around at used machines. I found a used machine with 20 hours and started looking at it. I thought I would ask for a new price as a check and ended up buying a new machine for 13% less than the used machine I looked at! My dealer got...

I totally agree with BigG, slip clutches need maintenance to be checked and set each year. I use my brush hogs infrequently and learned the hard way when my son destroyed the gearbox on a Woods BB72X with my MX5800, luckily it was the cutter that was damaged and not the tractor. I replaced the...

Welcome to my profile. I'm a dedicated Kubota owner and user. I have a range of equipment and lot's of attachments. I'm looking to learn from and share my knowledge with fellow Kubota users. Thanks for stopping by.

Fitting the chipper, ready for warmer weather and cleanup.

You will see the main drain plug on the attachment below, it's listed a (1). Good luck with your work.

First you need to select "rear PTO" with PTO select lever. When you use the PTO clutch lever to turn on the PTO, have your tractor at idling revs, once engaged, you can increase engine revs. I attached instructions. Good luck