Search results

Will this help? https://www.tractorbynet.com/forums/threads/inland-sa-48-snowblower-broken-driveshaft.163519/ Sounds like you arent going to find a manual anywhere….so not sure how you can get the grade of shear pin/bolt.

Are you getting into gravel or hard pavement regularly? I am a bit surprised they wear out with such a light tractor.

Don't know, don't care. I have more money than time right now so I just get the stuff that I know works. That may change as I get older and fully retire though!

Recommended Kubota brand synthetic engine oil and SUDT2 hydraulic fluid.

Hopefully if its engine you are covered. Make sure you have definitive proof of the failure and they don’t go throwing money at every little thing to “eliminate” possibilities...

Haha same. I took 1 day off for Christmas, 1 day for New Years. That was it all year (I do not work weekends). Not complaining though…

I would Just get good chains.

Yes. Also the diameter of the bit. The larger the diameter, the slower. You can get to the point where low flow wont turn a larger bit. @ibbuckhunter https://www.onesourcerental.com/specs/bobcat_auger_specs.pdf Looks like you need 12 gpm minimum to run it.

We love our pets more than most humans! They are part of the family!

To clarify, what position should the backhoe be in? I ask this because you can make that bucket closer or farther away...but it raises the boom/stick height and that might not work for your ceiling.

Unfortunately now the dealer can blame the tractor mechanic and vise versa...never a good situation for the machine owner. Sorry you have to deal with it sounds like you are taking it at all ends.

Then that makes even more of case for a larger tractor. Look at M5 if you are baling large rounds.

What size baler do you have or plan on using? M7060 isnt much tractor for a round baler….my advice if you expect to do serious round baling is more HP. Other than baling…the M7060 is a great, great machine. We have one on 100 acres and it has been awesome. We just dont bale with it. We...

They can justify it because their operating costs are also fluid. They may have been taking the operating loss for months before they decide to raise prices.

Nope. I have both on mine no issues. Just pay close attention make sure you arent extending something to tweak the QH….but it should not be much of a problem. I even keep my QH on with my rear blade.

Yes I think you have it now. control lever linkage adjustment. PM me and I can send you the WSM.

From this pick you have the top auger link in the wrong hole. 1. Move it to the lowest one on the tractor. (There are 3 holes shown). If you need to detach the lower links temporarily to do this go ahead. If you need to remove the auger motor (and you can) to lighten it up go ahead. You...

What brand/model is that auger?

No our M7060 never had an issue. We have a rotary cutter RCF1574 I think. No auger yet. I am curious though!

The hydraulic cylinders are what lift and lower the 3PT arms on the machine. At least the ones I am talking about. https://www.messicks.com/KU/96500?ab=1