Search results

It will be metric. On mine I think the socket size is 11mm and the zerk is considered a 10mm and a 10mm x 1mm thread should work. I’m not the best at zerk replacement but have found placing paper towel in the socket helps to keep it lined up when screwing in. If your threads are damaged bad most...

Unloaded ballast box, painted and reloaded yesterday.

Oh boy you opened up a debate. If I remember correctly the FF don’t drip like the ag’s but the FF are a bear to connect if there is excess pressure in the lines. Somebody will correct me if I’m wrong. ;)

I use the Kubota gear oil in front axle and use same oil in my tiller. Others have commented that the SUDT2 is thinner and my be more prone to leak at the seals earlier.

I have the Kubota OEM hydraulic top link. Dealer takes it from the TnT and just sells the top link. If I remember it is expensive but, whichever or whoever's you get - it's great to have.

I don't know the answer to your question but my Grand L w/ cab will fit under my 8' high OH door. I have R4's. I would assume you will be fine.

I'm not sure on your model but on my GL I found that sometimes I pushed the cylinders forward and I just couldn't get things lined up to get the FEL back on. Once I realized that I needed the loader frames at an angle, everything dropped in. To do this hook up the hydraulics and use the joystick...

You have float on the FEL. I've heard that the dealer can "tweak" the hydraulics up a little but, I have no personal knowledge of how that affects anything else, or how much it gives you. As a previous skid steer owner now tractor owner. The tractor will never be a SS, it just isn't built for...

That doesn't look right to me. I have a little wear in that spot but yours looks excessive like maybe the SSQA on the left side is pinched or out of spec? Here's the best pic of mine I could find offhand.

The consensus is it cuts down on radiant heat transfer into the cab, helps AC in summer.

Thought I'd update and basically close this thread. I could not get the wiper switch to work for my purposes, even with Chim and Fordtech86's help. I must have watched a hundred YT on relays. I think my problem is I'm trying to do everything after the switch anyways, I just wired the light into...

Installed the Reflectix liner while I had the roof off.

Oh my Chim and Fordtech86 you are awesome. I never thought about adding a relay! This is great info - thank you both so much.

Since I don’t have or need a rear wiper I got the bright idea to use a rear wiper switch and it’s circuit for LED beacon. Thought the momentary “wash” could be used to change flash pattern. Spent the last day and a half and am stumped! Removed roof, loosened headliner in back and pulled...

From what I remember reading there is not a whole bunch of room so I think everyone uses the Reflectix.

Took the roof off to install radio & speakers. Also going to hardwire my LED beacon and Reflectix underside while I have it off. https://www.orangetractortalks.com/forums/threads/cheap-way-to-add-a-blue-tooth-radio-to-a-kubota-cab-tractor.56484/post-574816

Thanks to Maine Farmer I got my radio in yesterday. I initially bought a harness from my dealer but noticed it only used 6 pins (on the 9 pin plug). I figured I needed at least 7 so ordered another via eBay. Turns out the Kubota OEM radio plug for Grand L’s doesn’t use the constant 12V pin...

Is this the area you’re talking about? Both sides have lots of slop but my rt side has a little more.

I think it has some play but I'll check tonight if you haven't gotten an answer. I have the same setup.

O Gauge? Another unfinished train set collector asking (HO) :rolleyes: