Search results

I 2nd Dawn - got Kubota moly grease on headliner and mrs “Pugota” was able to get it out with her Dawn.

Send the video to your service manager too. Let them know it wasn’t there before. Good luck.

I have a Tacoma here’s link to my brake controller install. I think Tundra uses same or similar harness. Brake%20control%20install%20write%20up.']Brake control install write up.[/URL]

Like a “squeak” noise? If it’s new lots of OTT members have had grease zerks that we’re either painted over or, in my case the passageway was plugged. If transmission oil was changed could be air in the cylinder. You’ll have to post a video with sound. There’s lots of great...

This is a cool thread worth following 👌

Yeah not much to do at 100 although I’ve heard reports of front axle case oil being low - even new and just delivered by dealer. I had a grease zerk on the BH upper pivot pin that wouldn’t take grease and after 10 hrs developed some squealing when swinging boom. Ended up to be plugged grease...

If you live in snow belt or snow areas what are you doing about the front? I ordered a HLA 1800 84” snow pusher due in early November. Since I’m mostly plowing residential paved and asphalt drives I opted for rubber edge on box and steel on back drag. I really had hoped for a back blade so I...

I did research trying to find a back blade for my GL. 7’ was minimum to cover tracks when angled. Go with the heaviest you can find. I too, have one set of rear remotes so was looking for hydraulic angle. I didn’t have the coin to buy it yet so still looking. I liked the Woods .60 series, Rhino...

Dealer shimmed lock over so it isn’t rubbing on one side.

Must be adjustable!

Old thread but I used a label maker and put the weights on the forks (and BH, and bucket) so I can remember them.

Ditto on KTAC into the monthly payment + added to my homeowners policy (about $164/year I think). My homeowners covers me at other peoples property but does not cover on public roads (accidents). Contractor or farm policy may be the way to go? Contractor insurance isn't cheap anymore especially...

Installed LED’s after computing load on hazard circuit. Wanted to keep connectors in weatherproof box. Should have painted the aluminum squares but oh well. I synced all strobes and left two unterminated wires in ea. box to change pattern later. Haven’t been able to find a male connector to work...

Amazing! You have great skills to be able to accomplish that.

I knew I was forgetting something when going through instructions with her :D

Cleaned out gutters with wife in basket.

I’ll plan to add an anti-gel to my containers after November 1st. I didn’t add anything to my skid steer but then I kept it in heated garage.

I'll second that. On CD the WSM is $110, $32 ea. for loader and BH. $22 ea. for operators manuals. Prices are different for each model I believe.

Thanks I didn’t think about that and I’m around MSDS and GHS all day. I fill at the local Shell but it has a disclaimer that the diesel is not a Shell product. It has a big diesel turnover. Stored in Flo-Fast containers in unheated garage. I could move them to my heated garage to ensure no...

I looked at my bottle of "diesel enhancer" that I brought home with tractor and noticed that it does not appear to help with gelling. I thought I'd research who makes it but cannot locate any info on the web. Since I'm in a cold temp zone I'm assuming I need to stop using this next month or...