Search results

Hose is leaking and it looks like a PIA to get to. It is the short hose, yellow marker tape, on the left side of the FEL if you are sitting in the driver seat, pics attached. Limited area to get to fittings. Anyone ever replaced this hose and if so how did you go about it, tools, etc.

Most of my usage is snow removal, I reverse the blade so that it does not cut. My question was about weight distribution, center or edges. I can tilt the blade but it is too much angle for what I do.

6' rear blade with old cutting edges for weight, hung from S hooks. Where would you hang them? Edges/ends or middle? I usually have them on each end of the blade but want to try concentrating the weights in the middle.

Thanks for the replies. It is probably the USB or length because I used the same charger with all the cables. I got the 9 footer on sale so it very well could be an inferior older USB. I'll just keep it for emergencies, it does work just very very slow. The charger is a wall plug unit and it...

I bought a charging cable for my phone and it is noticeably slower than other cables. Anybody know what could cause this, is length a factor? The new slow one is 9 feet and my others are in the 3 feet range.

I don't know if your model is different from the CAB model. In the CAB model the plug for the switch is tucked under the dash, left side where the front light switch is, there are knock outs. You basically have to loosen the dash and you will find it taped to the wiring harness.

Flying from our regional airports we have to be flexible and book way in advance, have always done that. The new norm is not user friendly.

Have you had "experiences" using Airline Miles? I had saved my United Miles and decided to use them. Well that was an experience, to use only miles and no cash I had to have an itinerary that took days or went through places like Newark. Now that would be thousands of miles out of our way. Ended...

I have an old Stanley that they don't make anymore, it was el cheapo guess that is why they discontinued it. It is lithium and will even start my 460 F-250. I have been looking at those capacitor type with no battery to keep charged like this one but there are lots out there so check reviews...

I'm a slow spinner, lol, so did get some out before it stopped. Getting it back on was the real issue, trying to spin on quickly with diesel making the bowl slick. Made the mistake of trying to use gloves but abandoned that after a few fails.

i Missed that but at least I followed directions and didn't exacerbate the problem.

Ran the level below 1/4, lowest I ever had it, but it still dumped fuel. Don't know if it would have been worse with more fuel.

Anybody have what they used for a fuel shutoff on a B2650, part # and size and procedure? Where did you access the fuel line, looks tight around the filter? Just did a filter change so it will be a while before I have to do it again but it was a mess trying to get it screwed back in while diesel...

Dividend funds.

My Dad had a bad gun experience so he never had guns but he let my uncle give me a J.C. Higgens Sears .22 single shot when I was 12. Dad taught me how to safely use the rifle and he would take me plinking. That rifle sat in my closet, not locked up, and it was never an issue with me or my...

Installed and no leaks and works fine. $15 seems like a good price, thought about getting a spare but tech said it was a bad hose and not common.

I need to replace a hydraulic hose on my FEL. Will just operating it purge the air or do I need to do something more?

Took the hose off, 7J999-99130, and it has cracks in the middle where it bends. No ware or rub marks, must have just deteriorated over 5 years time. Other hoses looks good. No place in our town to get this hose made so will make the trek to our Kubota dealer, they make them on site. May get an...

Anybody know the part # for the 16" hydraulic hose on the LA534 loader. The only number I could see is 75532 stamped on the metal crimp, when I plugged that number in I got all kinds of results.

Leaking hose, blue taped, looks good no wear apparent. Only 300 hours on machine so just a faulty hose. Now to find one without driving 50 miles one way.