Search results

No I do not have one on my tractor. I think I read on their site that they could set the initial hour to what you wanted. It has been some time since I was looking at these for another vehicle so I may be remembering incorrectly. I suggest you contact them and ask about it.

Here is an optional tach and hour meter that will work on diesels: http://www.tinytach.com/diesel.php

I think Wolman neglected to say: "Tighten the injector lines" (where I inserted X?X) replace lines to injectors but do no tighten at injectors, crank again till fuel leaks out lines X?X crank again, Should start!

I assume you have the three point arms on your tractor? Back the tractor up aligned to and near the implement On the tractor, there are two lower arms with eyes at the ends. These eyes fit over pins on the rotavator (tiller?). Then the upper link attaches the tractor to the top of the...

Rob, There is no spring like that on my L185 in that area. There is not a spring on the stop lever in that area at all. The closest thing on my tractor is the spring that holds the bonnet down. On mine it is a much heavier spring that attaches to a hook that then fits into a hole in the...

More pictures

Ok figured this one out! The glass lens is all that needs to come off. Mine was stuck to the reflector by the gasket and it took some prying to get it separated. Following is how it worked: Take the light off the tractor (3 nuts with washers, disconnect wires) Take the chrome ring off the...

You missed it. The original equipment on most tractors are called check chains. They are chains with turnbuckles and have to be tightened on both sides to keep the implement from swaying. They generally have to be loosed to change from one implement to another. The Stabilworks are...

You can look up part numbers on the Kubota website They have an on line illustrated part list. I think the part you need is 66591-18420 COVER M/S CHANGE

I am not sure how far you are to Georgia but here is a top notch L175 http://www.orangetractortalks.com/forums/showthread.php?t=13379&highlight=l175 You can read through another thread by Aquaforce about what he went through can be found searching L175 sheetmetal The heads can crack on...

I suggest you go to the Kubota website and look through the illustrated parts list. I tried the last day or two and its seems to be acting up right now, I could not get into it but it may just be my computer acting odd.

Thank you, I will try the razor blade.

These may be able to be put on front wheels and use free weights. http://lugghandles.com/

Sorry - just couldn't resist the easy jab at the title of the post! According to the internet there are about 125 million people in Japan. I imagine that most of them can read Japanese.

Thank you for the help. Mine do not look the same as that. I can't take a picture right now since my tractor is not near. The bulb has a wide flange on it that has the twist lock slots in in. This flange is where the glass and metal join so that makes me think it has to go through the...

Rob, I did not remember this weekend to look at the spring situation even though I was working on the tractor. I ordered all of the stickers/labels/nameplates for my L185F from the dealer. You should be able to do the same over there? If not, let me know and I can order/ship over to you...

Well, I am somewhat embarrassed to have to ask this: How the heck do you replace the headlight bulb on this tractor? The bulb looks like it has to go into the socket from the front (lens side). I removed the complete light assembly from the tractor, figured out how to get the 4 clip...

Rob, I was not able to remember to look at this (old timer's disease I guess) even though I was messing around with some stuff on my tractor this weekend. Sorry, I will try to look next weekend when I am around the tractor again. Russell

I own a 2WD L185 and you will only be able to put a 4 foot mower on it. Any larger and it will be way too light on the front end. I even put extra weight on the front to make it more stable. My property is fairly flat with a few humps and the front would come up if you hit them too fast...

Aquaforce - welcome back to the forum, I was wondering where you went to. My L185 has the same block in the parts list. I just use a 2x4 block on its side under the foot board and between the pedal since my tractor sits outside.