Rob
Member
Lifetime Member
Equipment
B6000DT / B7100DP /B8200DT/L225/Globe PTO Chipper/Lewis Backhoe/huxley TR66
Hi all, i am in the final stages of my L225 rebuild and all is progressing nicely, except for one item, 1 spring doesnt appear to have a connection at both ends, and to be honest i dont recall it being connected when i aquired the tractor.
Anyway, i have been through the workshop manual and all specs i can find and nothing seems to come to light.
I have attached 2 pics of the spring in question, one end is attached to a plate to the inner edge of the fuel filter, the other end is just floating around in the fresh air.
If anyone can clear up this mystery i would be very gratefull, i suspect its part of the stop engine rod assembly , but cant see anyway of connecting the spring to the rod, possibly another part missing.
any input greatly recieved.
rob
Anyway, i have been through the workshop manual and all specs i can find and nothing seems to come to light.
I have attached 2 pics of the spring in question, one end is attached to a plate to the inner edge of the fuel filter, the other end is just floating around in the fresh air.
If anyone can clear up this mystery i would be very gratefull, i suspect its part of the stop engine rod assembly , but cant see anyway of connecting the spring to the rod, possibly another part missing.
any input greatly recieved.
rob
Attachments
-
48.8 KB Views: 274
-
92.1 KB Views: 257