Search results

Kubota electrical systems are designed to be complex,thereby generating harness sales and business for dealers. If you buy a multimeter and take time learning to use it you can easily solve problems yourself. If your time is valuable and you don't want to take time learning how to use a...

Have radiator cap pressure tested. The cap should release pressure before it builds high enough to push a gasket out.

I'd first look at coil on clutch for signs of burning/melting. If it looks ok I'd test for 12 volts at coil. If there's 12 volts but clutch doesn't engage the clutch is burned out. If there isn't 12 volts, start at compressor going back toward switch looking for relay. If there's 12...

What ^he said and report back.

Not having dried grease in cavity makes it easier for penetrating oil to reach surfaces but the absence of grease might indicate the pin wasn't greased when installed or since. The 64k question is why wasn't cavity filled when you recently attempted to grease it????????? 🤔

Moving the bucket might speed things up but it isn't neccessary to position so so while greasing. I failed to ask if zerk is on end of pin or in housing. If zerk is on end of pin insert a drill bit and twist by hand to clear out hardened grease.

There have been plenty debates on which is best so I usually buy what's on sale to use where I don't want to make a mess but 90% of penitrate I use comes from a "catch-all" jug in the shop. When WD40 and other spray lubes run out of pressure with liquid left in can I poke a hole and pour it in...

4 weeks 96-100 range is also about all we get in Texas,,,,,,,,,,it's usually 101-107 the rest of Summer. 🤒

You need at least 20F so there's a problem somewhere. I'd start by installing a manual shutoff on heater hose in case valve is bypassing hot water to heater coil. If that doesn't help start over at square one looking at radiator,screen and other coils. Look BETWEEN coils,shine light to see...

Stop beating on the pins,that will swell them to where they will never come out. With zerk removed squirt Liquid Wrench or penitrating oil in hole,leave it to soak and return to refill. Replace zerk and attempt to grease with gun. Try wiggling pin with pliers. Once pin moves just keep...

I've lost count of coils I've found dirty after owner assured me they routinely cleaned them. The watch word is "between coils" and ability to see light through coils. Something I failed mention along with coil cleaning is DO NOT put screen wire in front to catch debris before it reaches...

I would start by asking the auto parts store for a kit to test for combustion gas in coolant. If it tests negative check thermostate,radiator fins,fan and other suspects. If test is positive pull head looking as you go for evidence of blown gasket. Whether you find the gasket blown or not...

The blades aren't off the shelf items at parts store but special order from radiator specialty shops. The demand is for use on automobiles but they can build one for anything if given specs. I would only install an auxiliary fan of any kind as last resort after making sure everything else...

Caps,hats, umbrellas or sombreros , old men don't last long out🤒side in the Texas heat these days either. I've been tearing down gasoline engines from 3 horse to 300 horse since I was a kid but I wouldn't attempt rebuilding a diesel on a bet. I pretty much view a diesel with serious wear as...

Before adding an auxiliary fan check everything for cleanness. Use lights and mirrors if neccessary to see between radiator,grill,screen,coils and such. Check between fins for dirt and duff. While engine is at ambient temperture backwash coils with garden hose. Don't use any kind of coil...

Lie on your back looking up from beneath tractor,you can see both ends of shaft.

There just isn't enough space for cat 1 implements between wheels on tractor showing break points.

Compared to the loader sub-frame you fabbed this is a piece of cake.

There is no set of answers regarding propane,number of competitors withing the area is the wildcard that dictates prices and service. In a competive market suppliers often offer free or cheap rental to high usage customers. In your case i don't think they will fight over your business since...

I'm not understanding what part the optional relay plays. Is this optional relay making contact between neg battery post and body of starter or to solenoid? If simply jumping from neg post to starter housing makes starter function normally I think that is 100% proof of poor contact between...