Search results

I have leaks from both rear wheels. Looks like some sort of seal issue. Anyone know anything about this (eg repairs/parts needed)

Many thanks for your suggestions. Might start with a pressure test. Cheers, Andy

My L1802DT hydraulics operate slowly when they warm up. I might get an hour's use from my front-end loader and my 3 point hitch then their operation slows to nothing. Changed filter and fluid, but that has not improved the situation. I was told that there may be air in the hydraulic system...

Think I might fab one up. Might cut the cone out with a grinder, then reuse the ring with the three lugs attached. Will need to find a headlight to fit snug.

The bulb isn't the problem. The glass fell out, hence the need to replace the whole thing.

Thought of that but (a) LED is expensive, and (b) I can't find an aftermarket headlight that has the three mounting tabs that come as part of the light. Without these three mounting tabs, you cannot mount the light to the tractor. See image at...

Hi, Anyone know of an aftermarket headlight for a L1802DT?

Got it at Repco. $190.00 per 20Litre. Cheers, A

Hi all, In the interests of sharing, I wanted to let you know that after doing my research, I decided to use Penrite Tractor Transmission and Hydraulic Fluid. Its a 10w30 multi-use product and according to Penrite the manufacturer, it meets the performance levels of: Kubota M80B Kubota Super...

Thanks heaps for putting this info on. It's saved me a lot of head-banging! Cheers, A

Thanks Wolfman. I was just about to ask the question about whether to use hydro fluid or another oil. I'll take your advice and use the hydro. Also, as you pointed out, I see three plugs near either wheel on the front axle. I took each of the three off, but only got oil out of the bottom...

Thanks for the tip. I painted the hydraulic ones red now. I ended up accidentally draining the engine oil (probably needed it anyway), and the diff oil from the front axle. Now I know which is which, I won't make that mistake again! Thanks to you both for your help. Cheers, A

Many thanks for your response. It's a big help. There are so many nuts under there that look like drain plugs. I'll stick to the ones you suggested. Cheers A

Hi, I have a L1802DT. Does anyone know how many drain bolts I should be looking for when I want to drain/change the hydraulic fluid? Also, does anyone know where I can find a manual for this model?