Search results

I forgot about Carr, I'll give them a try today.

Well, I got another old project that I can't find parts for. It's a Toro 11/38 model 57365. I hadn't got it running yet because I have to stop at the clutch. I can not find any replacement parts for it so I'm trying to source friction material to make my own clutch pad. Any ideas for you all are...

Those lower pulleys bend and dent easier than one would thinks. The PTO shaft can take a pounding.

Also see that the lower pully can turn by hand with the belt removed. Twine and grass knots around the blades and spendles, low lube in the gear box, and dry bearings can cause too much drag. Do you still have the sticker on the pto side that shows correct adjustment of the spring tension? This...

Check alignment Check no sharp edges on idler/ lower pully No too much play in idler bearings or lever Not too tight

Dang, I wish Vermont was closer to Georgia.

Cool, didn't realize that was mm wire sizes. Lernt something new.

I think it's like aircraft wiring diagrams (some very basic ones anyway). The symbols are grouping numbers like DC power, lighting, caution, etc. The 0.5 ones look like advisory lights or instrument sensors. Just my 2 cents.

One of my G4200s had a crushed spot in the return line and it didn't like running at and rpm over idle. It was completely pitched where a rock or limb hit it next to the frame and wasn't easy to find.

I use D&D on all mine. Works good X3.

Ever get the tractor out of cold storage yet? I still want to see the deck you have and how it's put together. I have I believe a similar deck and looking for the starting point of moding it.

I used my 5200 with the bottom plow to change the tires on my VW. Wasn't fast but worked in a pinch.

Flex seal for the win! Kidding unless it really works.

Hurts nothing to post what you did. Some of us might get something useful out of the info.

Well done, just post some pictures of your tractor anyway. 3700 is great.

I have three old pieces of David Bradley implements. Disc harrow, adjustable foot plow, and lay over plow. Do these have any collectable value, yard art, or should I go ahead and clean them up and modify them for a sleeve hitch?

If your pickup fuel pump is running you can hear the return fuel with the fuel cap off. Listen carefully for the return gurgling. No gurgling or ticking/clicking from the he fuel pump you need to troubleshoot there as well. It could also be a very clogged filter or a fuel line can be pinched...

When you replaced the fluids and filter did you raise the rear end and let it "slowly" rotate forward and reverse to get the air out of filter and pump? Ot can be time consuming on this model to get it right. The pump is mounted high and on the front of the rear axle direct driven from the...

Ha ha

I think she hates that tractor.