Search results

Thanks Pat! I'll see if the dealer has delivery valve washers. I just need to find a video of the valve adjustment and I'll do it today.

Ok gents I have a g1800 that I love, but just replaced deck pto bearings. Now drove it around "sweeping" my clippings up for an hour or two. Now it will crank and crank usually acts like its going to fire but does not run. Like I said it ran fine 2 days ago but will not start now. The battery...

The race that was stuck in the flange is now out. Thanks to a rental bearing puller the race was history with two pulls of the 5lb slide hammer.Next the needle bearing.... It's a little trickier I think but here goes. Mrmr56 I'm not sure but I think the flange had the 4 bolts and I did try to...

Shaft is out!!! Now how in GOD's name do I get the race and needle bearings out. The needle bearing looks like it went through a shredder!!

I have a G1800 and the noise it produces when the pto is engaged is horrible. The shaft that comes out of the engine and then it goes through the frame which keeps the angle correct for the shaft to turn the blades. Coming out of the bracket that is coming through the frame I can see what looks...

Thanks guys, as we thought it was the fusible link. I now have an extra 54" deck and shafts and pto boxes and spindles out the wazoo. The gentleman I got the mower from bought a lot at a municipal sale so he just gave me the spare deck and a parts bin that took a small tractor bucket to put on...

Thank you both for the answers. It was what I was thinking then. I was using it as it was a friend of mines tractor. Now I own it so I will be going ng through it and as you have suggested I will clean and dielectric grease every connection on it! It is not my first mower so it's not something I...

I was mowing then the mower dies. Just stops dead. Replaced diesel filter. Replaced battery but no juice no lights nothing. 12 volts at starter soienoid but no joy. Anyone have a guess as to what has happened? The three fuses are good under the steering wheel.

I just got a T1560 with the Kawasaki 14. My blade brake cable was sheared off so replace that but my blades continue to run even after I've disengaged them. I noticed there is a spring that seems to "bind" the blade brake. Any help/pics would be much appreciated

Would like to buy fc420v engine. It is needed for a t1560 kubota tractor.