B7800 Spring/locknuts missing from feedback bar. Replaced and Lever still floppy, bar does not reach spring

[TheOldHokie]

UMMM... It's assembled properly, although maybe not adjusted properly, that will come to play once it works.
And there is no lever on the other side, this is a canceling feedback, not an active feedback.
It only engages when it reaches max lift of the three point.

View attachment 178284

I stand corrected - I was assuming position control

In any event it does not appear to be assembled correctly - right order but wrong placement.

Dan

 

[North Idaho Wolfman]

I stand corrected - I was assuming position control

In any event it does not appear to be assembled correctly - right order but wrong placement.

Dan

Yea it's just out of adjustment... but that won't affect it actually letting the three point move.

 

[Chaos2art]

With the new cotter / hairpin in, is the lever still floppy?
If it doesn't spring to middle then you have a disconnect inside the case.

Thanks Wolfman - Still floppy. Darn

 

[North Idaho Wolfman]

Thanks Wolfman - Still floppy. Darn

You will now need to decide if you want to play mechanic or get someone else to do it.
If you want to do it yourself I can walk you through it.
Also might be a member in your area that could help you out?
I've helped out a lot in my area.