S

SDV

Active member
Messages
0
Reaction score
0
Points
38
Joined
Last seen

Profile posts Latest activity Postings About

  • Q
    Vic, needing to replace a very stickly ignition switch on my L245H. Parts list call for 37150-31820 but can only locate a 37150-3800. The wiring diagram on the L245H and the L245 are identical. So will the 3800 match up? I also cannot find the seal 35219-16410 for the steering shaft. Is there some other seal to use or do I take a plate of neoprene and cut to fit? Thanks very much.
    C
    Hi Vic,
    I havent received any info as yet. I have also checked my spam mail, and didnt find any mail from you.
    Thanks
    Conrad
    E
    Hello Vic,
    I have a problem I hope you can help me with.
    I just rebuilt the steering box an my L245F and all went well until I went to put the pittman arm back on. I can get to go about halfway but that's all. I have checked the alignment marks on the sector shaft and the arm and they line up but still can't get it all the way on.
    I have cleaned and greased the splines on the shaft and I am stuck.
    Any ideas how to get it back together.
    Thanks for your help.
    D
    Hi Vic,
    do you know if the cylinder head from the 2 cyl engines are interchangable? i have a L1801 DT with a cracked head and have found several sites offering new ones. The thing is some show them as the same for L1501 L175 L185 ect. others show them as diffrent! can you please help.
    Thanks
    Dave
    C
    Hi Vic,
    Sorry to get back to you so late. I just didnt know how to navigate around the forum, and only just found your reply by chance. Thanks for caring to reply. Do you have any pics for a "bed shaper" by the way. My e-mail address is;
    <conniferns@gmail.com>
    O
    I watched the videos you have on YouTube. As I am totally new to using a tractor, I found them helpful. Thanks.
    C
    Hi Vic, I was hoping to hear something from you, but guess you are just too busy. I joined this forum on 6th April, and posted about the little L1511 I bought. It came with a RS 1351 tiller attached. I need to build a Loader, and would like to know how and where to mount an under belly frame, for the tower posts to attach to. I can do most of the Fabrication work, as I have a welding shop, and am fully equipped with a Lathe, and drilling machines etc. I would appreciate some input from you, as I do not want to make any hasty fixtures, and crack the block, since there seems to be no chassis as such visible.
    Thanks
    Conrad
    M
    My service is a bit flaky tonight so not sure if my reply to you got sent. Here it is again just in case.

    Hi thanks for getting back to me. Not sure what all is available. I certainly want an operator manual and a repair manual. Parts might be helpfull, as would a master assembly manual. From your experience, what are the "must haves" ?
    If you can give me an idea of what is available and prices, I will prioritize my needs/wants.
    I should have the tractor here tomorrow sometime. I want to do a complete filter and lube change as my first step.
    best regards
    db
    M
    New to forum. New owner of an L35 TLB. Looking to aquire some manuals for same. Understand you are the "go to" for this. Advise
    best regards
    db
    M
    Hello good sir, I am a new to Kubotas having just purchased a B6000 with what I believe to be an S850 tiller. I need some new tines and the nuts and bolts used to mount the tines. Can you recomend a supplier or offer some part numbers?

    Thanks so much for the service you provide on this site!
    Micah
    D
    Hey Vic, I finnaly got my L185 running after finding the head gasket blown. Thank goodness thats all it was. Now I need a radiator and a water pump. Whats that usualy run with you.
    L
    Hello Vic. How can I get more power out of my L3010 . It boggs out real easy i have heard that you can turn up the fuel it is 10 years old so i do not have to worry about warranty Thanks
    J
    Does you here know if my B6000 will handle the original k-42 tiller if I only have 2 wheel drive is 4 wheel drive needed for traction.
    I was told the ccw pto on this tractor would make it too hard to pull a tiller.
    How hard is it to find a tiller to work on the b6000?
    Do you know what other manufactures make a tiller that would work on a b6000?
    eserv
    Hi Vic
    Some of the files there are software to run our systems checker for the power shift and common-rail fuel system. They are no good to anyone unless you have the adaptor. I just shared the whole file because I have it there so I can access it anywhere myself.
    Ed
    U
    Stil getting the hang of this forum thing. Messaged Ronnie at Tractorsmart, he had me get the frame serial# and found it was sold new in 1990. Thank you for checking. I need to start checking my messages a little closer. Thanks a bunch. Uncle Jed.
    U
    Hello Vic. This is uncle jed. I was wondering if you had any reference material to be able to figure out what year my f2100 was made. I know I shouldn't get impatient to find out since I have had it for approximately 7 or 8 years ,but since I found this forum I am trying to find out all I can about it. Thanks for listening, uncle jed.
    O
    Vic is their any study guide on the site on how to keep posts running smooth? When I saw that Kevin guy's post hit last night, I knew something bad happen because it took over every current posting almost instantaniously. I'm not a hacker so I don't know how they do it but we probably need to talk with Chris like you say to protect our integrity...
    Thanks for the quick reply. I have spent the night on Chryslers Dealer Connect, Altec is now a Truck Dealer and I have control over specing the new Cummins 6.7 liter engines in the class five chassis so I didn't get to relax on the site tonight as usual...;)
  • Loading…
  • Loading…
  • Loading…
Top Bottom