Pat_USA's latest activity

  • P
    Pat_USA replied to the thread Kubota T1880 Won't Drive.
    I'm here at local Kubota dealer, they don't have a bolt & washer in stock but they have deck belt in stock. They have to order it, I...
  • P
    Pat_USA replied to the thread Kubota T1880 Won't Drive.
    I just realized I posted the same photo earlier. Here’s another picture: the belt came off the lower pulley (in the back), I was able to...
    • IMG_2325.jpeg
    • IMG_2328.jpeg
  • P
    Pat_USA reacted to Russell King's post in the thread Kubota T1880 Won't Drive with Like Like.
    See post #11 for the belt (that attaches the engine output pulley to the mower deck input pulley. It attaches the lower pulley on the...
  • P
    Pat_USA replied to the thread Kubota T1880 Won't Drive.
    I need help again since the guy who was supposed to fix it, along with my other vehicle, never came back. My grass is overgrown, so I...
    • IMG_2324.jpeg
    • IMG_2324.jpeg
  • P
    Pat_USA reacted to Caden's post in the thread Kubota T1880 Won't Drive with Like Like.
    You're welcome. I've never encountered having one of these bolts break or back out while mowing but I guess it's possible, especially...
  • P
    Pat_USA replied to the thread Kubota T1880 Won't Drive.
    I'm sure it's easy to find in the right-hand turn, I don't think I would find the left-hand turn at the hardware store. The repair guy...
  • P
    Pat_USA reacted to Caden's post in the thread Kubota T1880 Won't Drive with Like Like.
    Probably it is cupped a little bit so always applies tension to the bolt/blade to prevent it from loosening. I wasn't sure if you needed...
  • P
    Pat_USA reacted to Caden's post in the thread Kubota T1880 Won't Drive with Like Like.
    Evening. You sure have had a long saga of events with this mower :) I found the bolts on a diagram on Messick's .com. The bolts are...
  • P
    Pat_USA replied to the thread Kubota T1880 Won't Drive.
    Wow, that’s pretty expensive, so I guess I’ll have to buy directly from the authorized dealer. The “Plate Spring” looks like a washer...
  • P
    Pat_USA replied to the thread Kubota T1880 Won't Drive.
    A couple of weeks ago, the repair guy broke one of the bolts holding the cutting blade, and he still hasn’t replaced it. What size is...
  • P
    Pat_USA reacted to Hugo Habicht's post in the thread Kubota T1880 Won't Drive with Like Like.
    I assume you have losened the bolt by holding the blade against a wooden block. Once the blade is loose the spindle may start turning...
  • P
    Pat_USA reacted to Caden's post in the thread Kubota T1880 Won't Drive with Like Like.
    Same, I don't want to say anything too confidently because the different viewpoints are throwing me off.
  • P
    Pat_USA reacted to Russell King's post in the thread Kubota T1880 Won't Drive with Like Like.
    See the information in post #51 from whitetiger. It is the information from the Kubota manual that shows how to remove and install the...
  • P
    Pat_USA replied to the thread Kubota T1880 Won't Drive.
    Ok, I will ask him next time, he still has to come back to fix my vehicles.
  • P
    Pat_USA replied to the thread Kubota T1880 Won't Drive.
    I cleaned under the deck and loosened the left side blade (as shown in the picture) while he went out to purchase some parts (belt). It...