Recent content by mtnplower

When I say Municipal tractors Im referring to Holders, Maclean, Trackless etc I thought that HST was not an option for the 100+ horsepower tractors ? Thats interesting that they wouldn't sell you an auto Cherokee.

I am seeking advice as to which transmission would be the best for the snow removal application

I have municipal tractors that are 110hp with 8 foot blowers which is the industry standard. However a utility tractor with blower has its benefits with a bigger cab, operator comfort and better visibility. The tractors drive from house to house. Each tractor services 100+ driveways. On big...

I am looking at moving up to a 2010-2017 100-125hp tractor. Its primary purpose is for snow removal I would run a Zuidberg front PTO with a Pronovost blower. I service driveways that are on average 30 feet long. Its usually 3-5 swaths so theres a lot of backing up for each driveway. I deal...

I ordered the bearing flange and I'm ready to install everything back in Can the bearing flange be installed first onto the driveshaft and then slide it All in or what's the best method to put it all back together?

I didn't know there were different versions The serial number is 21113021

I was running the blower the other week and sucked up a river rock. The rock caused the chain to pull forward ripping the driveshaft out of the bearing. I ordered this bearing, Part # #77700-00959 .. I removed what is left of the old bearing and began to look at the new bearing the issue...

The new chain is the same exact length as the old chain however there's several Links of Slack with the new chain clearly I'm not doing something correctly

Does anybody have the drawing on how the roller chain gets routed for the l2195 snowblower?

Do I have to take off the cross brace to access this?

I have never seen shear bolts for the auger..........where are they located? The impeller's shear bolt is in tact as the impeller functions perfectly

I was running the snowblower the other day and sucked up a big rock. The auger stopped spinning however the impeller still spins What would cause this?

Only the grease nipple broke off, the hex head is still intact

I broke a Zerk Fitting on the Ujoint for my L2195 Snow Blower What is the best way to remove the Zerk Fitting and replace it?

hmmm thats weird they gave me the ball style but the they wont lock in