Recent content by mc84721

They are tough to find! I jumped right on this one, knowing what it was.

What were you fixing in this picture? Any common issues you see with these? Any thoughts on super udt2 and kubota filter on quieting the transmission down? Ever change an o ring on an aluminum plug in the side of the hydrostatic pump? I did one yesterday, miserable job but got it done.

I recently purchased a F3080 last month. Local dealer trade needing tlc. Came with soft cab, mower and blower. I just sold my f2560e to a friend that I had for 6 years. With 2500 hours, I'm hoping to make it last a very long time for home owner use. Anyone else running an f series? They seem to...

Looking at a 1995 r410 with rops. Runs, has hydraulic leak near oil cooler. Unknown hours at the moment. Runs and drives otherwise. Bucket and forks. From what I hear, these are bulletproof machines. I don't see too many for sale to try and figure out what a reasonable price is. What do you...

Ah I used to have an old McKee with those open bevel gears. They were fine and everything worked, but they always made worry how long they would last without lubrication. Thanks for the heads up.

Hi all, found a good deal on a brand new front mount 60" Kubota snowblower. Mounts and PTO have been robbed off of it. Price is very reasonable. Questions are.. would this rotate the correct direction if moved to the back of the tractor? Would this originally have been 1000 rpm if it ran off...

Perfect! Thanks for finding that. It's not that I couldn't use a stick to check the level, but it's a nice tractor and I like everything to work like it did from the factory, lights included.

Hi all, recently purchased a l2350 from the original owner, with 570 hours. Since the fuel gauge wasn't working I yanked the cowling off, and saw lots of rust from mouse piss. Fuel tank sending unit is very rusty and coming apart. Looking in the exploded view, it looks like the fuel tank and...

Hi all, recently purchased a l2350 from the original owner, with 570 hours. Since the fuel gauge wasn't working I yanked the cowling off, and saw lots of rust from mouse piss. Fuel tank sending unit is very rusty and coming apart. Looking in the exploded view, it looks like the fuel tank and...

Thanks for the reply. It does have a mid PTO. I'll venture a guess mine is the dc-dp. It is the 3 speed, 3 range 4x4 model. It does have the bf350 loader, which I understand will have to be removed. Sent from my XT1254 using Tapatalk

Hi all, I found a BL 2563 snowblower for sale, supposedly off a b8200, which very similar to my b9200 to my understanding. It doesn't appear to have a lift cylinder.. should it? It looks like it comes with the sub frame and drive shaft. Even I had to modify it some, I'd be okay with that...

It may have sucked air, it probably had a 1/4 tank. Doesn't have a filter housing per se, just an inline filter before the pump. Still it seemed like it would have fired much sooner than it did. Sent from my XT1254 using Tapatalk

Finally got it to run tonight. Air filter was new in july, no mouse nests etc. Bleed fuel system again. It finally caught and ran, then stalled. Started hard again, ran then stalled. Restarted and it stayed running. Not sure what the issue is/was. Maybe the injection pump / injectors are worn...

Hi all, A month and a half ago, I pulled my trusty f2560 out of the shed and left it running. It has always started fairly easy and ran fine. When it was running, it just shut off. Would crank but not fire. Replaced shut off solenoid, no help. Engine is getting fuel, injector lines were bled...

Did a little reading on those. Apparently some dealers had a sale on them when new for $5450. A b7100 with a loader will still sell for that and more. The rear tires seem a bit small though. Sent from my XT1254 using Tapatalk