Oversize load shuts down road in texas

D2Cat

Well-known member
Lifetime Member

Equipment
L305DT, B7100HST, TG1860, TG1860D, L4240
Mar 27, 2014
13,885
5,689
113
40 miles south of Kansas City
I am astonished how reporters handle their work. I've read several report and looked at pictures of this and realize reporters know very little about what they write.

Many call it an 18 wheeler. Guess it never occurred to them why 18 wheelers are called 18 wheelers.

They infer the truck was the problem and caused the death of two souls. The survivor was the driver of the vehicle that passed on the right shoulder ignoring the escorts and police.

 

GreensvilleJay

Well-known member

Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
Apr 2, 2019
11,674
5,051
113
Greensville,Ontario,Canada
Can't find any real details, as most news sites stop as I have adblocker....
if the driver of the car does survive, hope he's charged with murder x2 and hung before the end of the year.
saw one picture, 150 ton pipe ! wonder WHY it came off the zillion tired trailer ?
 

fried1765

Well-known member

Equipment
Kubota L48 TLB, Ford 1920 FEL, Ford 8N, SCAG Liberty Z, Gravely Pro.
Nov 14, 2019
7,847
5,070
113
Eastham, Ma
I am astonished how reporters handle their work. I've read several report and looked at pictures of this and realize reporters know very little about what they write.

Many call it an 18 wheeler. Guess it never occurred to them why 18 wheelers are called 18 wheelers.

They infer the truck was the problem and caused the death of two souls. The survivor was the driver of the vehicle that passed on the right shoulder ignoring the escorts and police.

Reporters seem to be consistently even WORSE for aviation accidents!
 

85Hokie

Moderator
Staff member
Lifetime Member

Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Jul 13, 2013
10,770
2,581
113
Bedford - VA
Can you imagine a load of 350,000 pounds moving at a rate of maybe 60 mph?

Newton's second law saying it best .......... Mass X Acceleration = Force , and that's a hellva lot of force!
 

GreensvilleJay

Well-known member

Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
Apr 2, 2019
11,674
5,051
113
Greensville,Ontario,Canada
A LOT of trains are heavier and go faster .........

Rather doubt the super load was doing 60 though. permit would specify speed ?
 

85Hokie

Moderator
Staff member
Lifetime Member

Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Jul 13, 2013
10,770
2,581
113
Bedford - VA
A LOT of trains are heavier and go faster .........

Rather doubt the super load was doing 60 though. permit would specify speed ?
This wasnt a train - and trains do not have "cars" trying to pass them on the inside! :ROFLMAO:

I cannot imagine the force of a train fully loaded , 100+ cars - makes sense it takes a long mile to stop!
 

GeoHorn

Well-known member
Lifetime Member

Equipment
M4700DT, LA1002FEL, Ferguson5-8B Compactor-Roller, 10KDumpTrailer, RTV-X900
May 18, 2018
6,052
3,323
113
Texas
I am astonished how reporters handle their work. I've read several report and looked at pictures of this and realize reporters know very little about what they write.

Many call it an 18 wheeler. Guess it never occurred to them why 18 wheelers are called 18 wheelers.

They infer the truck was the problem and caused the death of two souls. The survivor was the driver of the vehicle that passed on the right shoulder ignoring the escorts and police.

I didn’t see anywhere in the link the term “18-wheeler”…. (they called it a “trailer”)…..but I wouldn’t have focused on 18-wheeler phraseology as noteworthy or objectionable in the report anyway.

Here’s a pic of the accident:

IMG_2685.jpeg
 

GreensvilleJay

Well-known member

Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
Apr 2, 2019
11,674
5,051
113
Greensville,Ontario,Canada
so.... how many straps/tie downs were holding the 150 TON 'pipe' ?
really curious as to WHY the pipe 'fell off' !
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
30,553
6,602
113
Sandpoint, ID
For those that don't know that is a cracking unit.
It's used to make fuel from crude oil, they are incredibly expensive.

1714518684145.png

so.... how many straps/tie downs were holding the 150 TON 'pipe' ?
really curious as to WHY the pipe 'fell off' !
Here is the most likely scenario, that trailer is electronically and computer controlled and steers.
when the car got to close the trailers tried to move to miss the car but an object moving the opposite direction from what the computer thought most likely fowled up the whole thing.
They also move the steering on every trailer all at once and a kink in end or the middle of that trailer train is quite catastrophic to the load.

It's 100% the cars fault as there were more than likely mutiple signs and vehicles telling them not to pass.

Old trailers like this had drivers under each section steering each section, it was quite the sight.
It was also quite dangerous for the trailer drivers as people would run into them all the time, and there wasn't much crash protection to them.
Most likely that style of trailer would have had the same result
 

Dustball

Active member

Equipment
2016 B2650HSDC
Sep 15, 2023
312
188
43
Hudson, WI
so.... how many straps/tie downs were holding the 150 TON 'pipe' ?
really curious as to WHY the pipe 'fell off' !
From a Reddit thread-

Topher4570
2d ago
A coworker is a first responder. According to him, the car blew past the police escort and the company escort in an attempt to get around the load. They hit the truck, causing the accident.


Of course, this is just some guy's words but a load like that doesn't just fall off without an outside action to cause it to.
 

PoTreeBoy

Well-known member
Lifetime Member

Equipment
L35 Ford 3930
Mar 24, 2020
2,829
1,544
113
WestTn/NoMs
Those distillation columns are typically transported overland by truck or rail. There are trunnions near the front and rear to allow turning. At each trunnion, the vessel sits in a saddle and the vessel is strapped to the saddle. On the right side of GeoHorn's picture, you can see the front? trunnion, saddle, and what appears to be a broken strap. The trailers, or flat cars, between the front and rear are just spacers.

Incidentally, the tear-shaped piece near that saddle is part of the lifting trunnion used to stand the column up and place it.

Those loads have a fairly high cg. Maybe a road failure or tire failure allowed one side to drop?