What did you do to or on your Kubota today?

S-G-R

Well-known member
Lifetime Member

Equipment
LX3310
Jun 17, 2020
1,116
2,265
113
PEI Canada
There was a plow furrow left between our two lots. I started leveling it last year but ran out of fill. My fence line cleanup gave me the fill and I started moving it today.

20240425_161233.jpg

20240425_185529.jpg
 
  • Like
Reactions: 5 users

mcmxi

Well-known member
Lifetime Member

Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25DLB
Feb 9, 2021
5,327
6,340
113
NW Montana
welp, did my last job for the plumbing company today. The company was sold and my wife (GM) will not be working for the new owner...so neither will I.

View attachment 126957

I had a good time doing the work, very enjoyable digging for me. So, I suppose I'll need to branch out more for the mini to earn its keep.
I hae
There was a plow furrow left between our two lots. I started leveling it last year but ran out of fill. My fence line cleanup gave me the fill and I started moving it today.

View attachment 127011
View attachment 127012
At first glance I thought you were under attack from a bunch of little Yodas. 😂 What's in the box?! I mean, what's in the sacks?
 
  • Like
  • Haha
Reactions: 1 users

fried1765

Well-known member

Equipment
Kubota L48 TLB, Ford 1920 FEL, Ford 8N, SCAG Liberty Z, Gravely Pro.
Nov 14, 2019
7,843
5,066
113
Eastham, Ma
  • Like
Reactions: 1 user

S-G-R

Well-known member
Lifetime Member

Equipment
LX3310
Jun 17, 2020
1,116
2,265
113
PEI Canada
I hae


At first glance I thought you were under attack from a bunch of little Yodas. 😂 What's in the box?! I mean, what's in the sacks?
Blue spruce. We planted them last year and the garden center suggested wrapping them for the first couple winters until the roots get established.
 
  • Like
Reactions: 1 users

mcmxi

Well-known member
Lifetime Member

Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25DLB
Feb 9, 2021
5,327
6,340
113
NW Montana
Blue spruce. We planted them last year and the garden center suggested wrapping them for the first couple winters until the roots get established.
Nice! Those will look amazing in a few years.

I typically buy a spruce in a bucket around Christmas, put it out on the deck and decorate it (outdoor Christmas tree) then plant it in the spring. I have a couple of nice ones that did well and one went from 4ft to 9ft in four or five years. We see about 12" per year of growth at the most for firs, spruce, pine, etc. What sort of growth rate do you see in your area?

I have hundreds of trees on my property, but mostly in one corner. Luckily the fir trees are quite happy and don't need my help with their agenda to re-populate the entire property.
 
Last edited:
  • Like
Reactions: 1 user

NCL4701

Well-known member

Equipment
L4701, T2290, WC68, grapple, BB1572, Farmi W50R, Howes 500, 16kW IMD gen, WG24
Apr 27, 2020
2,801
4,246
113
Central Piedmont, NC
welp, did my last job for the plumbing company today. The company was sold and my wife (GM) will not be working for the new owner...so neither will I.

View attachment 126957

I had a good time doing the work, very enjoyable digging for me. So, I suppose I'll need to branch out more for the mini to earn its keep.
Will miss your pictorials of your underground plumbing adventures. Hope you pick up something at least as lucrative and interesting.
 
  • Like
Reactions: 3 users

S-G-R

Well-known member
Lifetime Member

Equipment
LX3310
Jun 17, 2020
1,116
2,265
113
PEI Canada
Nice! Those will look amazing in a few years.

I typically buy a spruce in a bucket around Christmas, put it out on the deck and decorate it (outdoor Christmas tree) then plant it in the spring. I have a couple of nice ones that did well and one went from 4ft to 9ft in four or five years. We see about 12" per year of growth at the most for firs, spruce, pine, etc. What sort of growth rate do you see in your area?

I have hundreds of trees on my property, but mostly in one corner. Luckily the fir trees are quite happy and don't need my help with their agenda to re-populate the entire property.
Average growth would be 12-18" per year. I'd love to have two rows of them all the way around the property but that isn't in the budget. My goal is to get at least a 100 trees planted a year for the next five years.
 
  • Like
Reactions: 1 user

Sawburner

Active member

Equipment
L2501, Gravely 526
Dec 18, 2022
59
148
33
NY
We have bought trees and shrubs from alphanurseries.com for a couple years and have a good survival rate. They ship bare root and have several different size plants, they do have a minimum order, we order with our two son in laws. Very reasonably priced.
 

In Utopia

Active member

Equipment
L175 FEL
Apr 21, 2013
613
113
43
Utopia,Tx/Pasadena,TX
welp, did my last job for the plumbing company today. The company was sold and my wife (GM) will not be working for the new owner...so neither will I.

View attachment 126957

I had a good time doing the work, very enjoyable digging for me. So, I suppose I'll need to branch out more for the mini to earn its keep.
Gonna miss your posts. Always like to see how others do things.
 
  • Like
Reactions: 1 user

In Utopia

Active member

Equipment
L175 FEL
Apr 21, 2013
613
113
43
Utopia,Tx/Pasadena,TX
For a hack, I am pretty excited about what I got done on my B2620 TLB today. I need covered storage for a variety of trailers, tractor implements, and a bunch of other stuff. Plans for a container box pole barn got derailed by a host of issues so I have backburned that project and will erect a 20x30 carport structure for a tenth of the cost of the pole barn. So I cleared a wooded section of the property to get ready for the carport. I still need to so some boxscraping to get it a bit more level and then spread some gravel.

Here is what it looked like at the start

View attachment 127006

And this is what I ended up with

View attachment 127004
View attachment 127005

And here is some of the in-progress shots
View attachment 127007
View attachment 127008
View attachment 127009
View attachment 127010

I learned alot and got much faster near the end. It is impressive what one can do with a compact tractor!
Good job.
 

Snowman7

Well-known member

Equipment
LX3310 535 loader, LX2980, RB2672, FDR1660
May 20, 2020
367
258
63
Boyne Falls, MI.
Average growth would be 12-18" per year. I'd love to have two rows of them all the way around the property but that isn't in the budget. My goal is to get at least a 100 trees planted a year for the next five years.
I did that starting about 15 years ago( I think ). I put in Norway spruce, 100/yr., for 5 or 6 years. Purchased from the county soil conservation district. All of our Blue Spruce in this area (Northern Michigan) are dying. They are quite large and doing well. I was attempting to block road noise more than anything. Thinking about it now it could be closer to 20 years, lol. I think Norways grow about twice as fast as Blue Spruce.
 
  • Like
Reactions: 1 users

S-G-R

Well-known member
Lifetime Member

Equipment
LX3310
Jun 17, 2020
1,116
2,265
113
PEI Canada
I did that starting about 15 years ago( I think ). I put in Norway spruce, 100/yr., for 5 or 6 years. Purchased from the county soil conservation district. All of our Blue Spruce in this area (Northern Michigan) are dying. They are quite large and doing well. I was attempting to block road noise more than anything. Thinking about it now it could be closer to 20 years, lol. I think Norways grow about twice as fast as Blue Spruce.
I don't recall exactly what variety mine are. There is an issue here as well with the blues, a fungus maybe. Apparently you can spray for it.
 

S-G-R

Well-known member
Lifetime Member

Equipment
LX3310
Jun 17, 2020
1,116
2,265
113
PEI Canada
Picked up a Landpride 60" soil pulverizer from a customer tonight. We're trading some work and I'm going to use it to level our adjoining lot. The grass died off over the winter and there are a lot of ruts so I'm hoping this will do the trick.
 
  • Like
Reactions: 1 user

johnjk

Well-known member
Lifetime Member

Equipment
B3200 w/loader, Woods RC5 brush hog, 4' box blade, tooth bar, B1700 MMM,
Apr 13, 2017
1,462
1,272
113
West Mansfield, OH
New toy Saturday. Time for a cup of coffee and think about the unloading IMG_2191.jpeg
 
  • Like
Reactions: 14 users

jyoutz

Well-known member

Equipment
MX6000 HST open station, FEL, 6’ cutter, forks, 8’ rear blade, 7’ cultivator
Jan 14, 2019
2,994
2,036
113
Edgewood, New Mexico
We have bought trees and shrubs from alphanurseries.com for a couple years and have a good survival rate. They ship bare root and have several different size plants, they do have a minimum order, we order with our two son in laws. Very reasonably priced.
For people who own land, most state forestry organizations sell tree seedlings every spring. You can’t beat the price.
 
  • Like
Reactions: 2 users

johnjk

Well-known member
Lifetime Member

Equipment
B3200 w/loader, Woods RC5 brush hog, 4' box blade, tooth bar, B1700 MMM,
Apr 13, 2017
1,462
1,272
113
West Mansfield, OH
Plan a worked. Storms moving in so I will play tomorrow. Had to put on the box blade for ballast but she lifted around 3” and came out without damage IMG_2194.jpeg IMG_2193.jpeg IMG_2192.jpeg
 
  • Like
Reactions: 7 users

flyidaho

Well-known member

Equipment
L 3301 HST
Feb 28, 2017
428
253
63
IDAHO
I started my spring cleanup of the deadfall around my bike trail, logging I guess you could call it. I'll take the fat tired trailer I made for my ATV down there, and the Greenworks chain saw, and start re-stocking the woodshed for the shop's wood boiler, winter is coming!
IMG_20240426_095529491.jpg
All the little branches will be run thru the tractor's chipper, and spread on the bike trail.
 
  • Like
Reactions: 9 users

RCW

Well-known member
Lifetime Member

Equipment
BX2360, FEL, MMM, BX2750D snowblower. 1953 Minneapolis Moline ZAU
Apr 28, 2013
9,155
5,245
113
Chenango County, NY
Gotta get this puppy a little closer to the tractor.

Tape with “No Oil” written on it will hopefully remind me to refill the gearbox before I fire it up….🤓

IMG_6783.jpeg
 
  • Like
Reactions: 5 users

S-G-R

Well-known member
Lifetime Member

Equipment
LX3310
Jun 17, 2020
1,116
2,265
113
PEI Canada
The pulverizer is working as expected. There is quite a bit of dead material and I raise and lower it as needed. Using the grapple to move the debris to a pile although I think manure forks or a rock bucket would be better options.

20240427_122202.jpg

20240427_125331.jpg

20240427_125342.jpg
 
  • Like
Reactions: 7 users