Spring Tooth Rake Showed Up Scratched

GrizBota

Well-known member

Equipment
L3830HST/LA724, B2601/LA435/RCK54-32, RCR1872, CDI 66”grapple, pallet forks
Apr 26, 2023
1,153
736
113
Oregon
Should I return it?:ROFLMAO:

Really it’s got dozens of scratches, but I’m kidding about returning it. I know we all like our new stuff shiny when we get it, I’m making light of that.

I got this to see if I can rake up twigs and branches smaller than my wrist, but not pick up too much pine needles and grass. That’s why I left every other tooth out.

it was $230 from China via an Amazon vendor. 6’ long (two 3’ pieces bolt together to make the back bone). Weighs about 85 lbs.

I absolutely expected it to show up looking like the box went through a washing machine and scratched all to hell. I was not disappointed. Here’s what the contents looked like when I opened the box. Sorry no close ups of the terrible scratches.

But I expect new US made and shipped equipment to show up with a few beauty marks (e.g. hopefully nothing worse than the first 10 hours of use will put on it anyhow).

IMG_3591.jpeg


Here is is assembled and on the little B. Have yet to use it. When it dries up a bit more, I’ll update with how it worked out for what I wanted to do.

IMG_3597.jpeg
 
  • Like
Reactions: 2 users

NCL4701

Well-known member

Equipment
L4701, T2290, WC68, grapple, BB1572, Farmi W50R, Howes 500, 16kW IMD gen, WG24
Apr 27, 2020
2,803
4,252
113
Central Piedmont, NC
Looks like the one I have in my shed except mine has all its teeth. Will be interesting to hear how it works with half the teeth. Hope it does what you want it to do.
 

GreensvilleJay

Well-known member

Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
Apr 2, 2019
11,428
4,910
113
Greensville,Ontario,Canada
1.. I HATE styrofoam
2.. Bit of a puzzle on HOW to properly pack the 'springs'
3.. dang good price for all the parts
4,,'some assembly required', anything left over ??
 

GrizBota

Well-known member

Equipment
L3830HST/LA724, B2601/LA435/RCK54-32, RCR1872, CDI 66”grapple, pallet forks
Apr 26, 2023
1,153
736
113
Oregon
1.. I HATE styrofoam
2.. Bit of a puzzle on HOW to properly pack the 'springs'
3.. dang good price for all the parts
4,,'some assembly required', anything left over ??
All the parts were in the box still and if I’d mounted all the springs, there’d be no left over parts. As it is, I have 13 “extra” spring teeth and bolts.
 

wp6529

Active member

Equipment
B7100DT
Oct 31, 2023
152
97
28
TX
The USA heavy duty stuff is nice, but sometimes that China stuff is just fine and hard to beat. I have clamp on forks I use on my backhoe, like $200 delivered and now like 5 years later still going strong moving 1,800# feed sacks and whatnot regularly.
 

GrizBota

Well-known member

Equipment
L3830HST/LA724, B2601/LA435/RCK54-32, RCR1872, CDI 66”grapple, pallet forks
Apr 26, 2023
1,153
736
113
Oregon
The USA heavy duty stuff is nice, but sometimes that China stuff is just fine and hard to beat. I have clamp on forks I use on my backhoe, like $200 delivered and now like 5 years later still going strong moving 1,800# feed sacks and whatnot regularly.
Should do the trick for my intended usage as long as the teeth don’t snap off or some such nonsense. I’ll report back once I knock the shine off.
 

GeoHorn

Well-known member
Lifetime Member

Equipment
M4700DT, LA1002FEL, Ferguson5-8B Compactor-Roller, 10KDumpTrailer, RTV-X900
May 18, 2018
6,040
3,316
113
Texas
Soo…WHO did you buy it from…and for How Much..? And how long did it take to get it…? Shipping..??
 

jimh406

Well-known member
Lifetime Member

Equipment
Kubota L2501 with R4 tires
Jan 29, 2021
2,359
1,788
113
Western MT
When it dries up a bit more, I’ll update with how it worked out for what I wanted to do.
I can't think of any way that would work for me for anything. What are you planning on doing with it? Raking limbs?
 

GrizBota

Well-known member

Equipment
L3830HST/LA724, B2601/LA435/RCK54-32, RCR1872, CDI 66”grapple, pallet forks
Apr 26, 2023
1,153
736
113
Oregon
Soo…WHO did you buy it from…and for How Much..? And how long did it take to get it…? Shipping..??
First post covers most of those. Shipping was included in the price and it took about 10 days. Actual vendor name was YITAMOTOR, I suspect just one of thousands of middlemen for made in China products.

It wasn’t EA.
 
  • Haha
Reactions: 1 user

GrizBota

Well-known member

Equipment
L3830HST/LA724, B2601/LA435/RCK54-32, RCR1872, CDI 66”grapple, pallet forks
Apr 26, 2023
1,153
736
113
Oregon
I can't think of any way that would work for me for anything. What are you planning on doing with it? Raking limbs?
Nailed it. As stated in the initial post.

it’s actually made for “pine straw” (needles).
 
Last edited:
  • Like
Reactions: 1 user

mikester

Well-known member

Equipment
M59 TLB
Oct 21, 2017
3,556
2,024
113
Canada
www.divergentstuff.ca
The USA heavy duty stuff is nice, but sometimes that China stuff is just fine and hard to beat. I have clamp on forks I use on my backhoe, like $200 delivered and now like 5 years later still going strong moving 1,800# feed sacks and whatnot regularly.
If you have a welder, plasma cutter, grinder, stock steel, a mag drill, milling machine, lathe, millwright skills and a heated shop the chinese equipment is a great deal.
 

wp6529

Active member

Equipment
B7100DT
Oct 31, 2023
152
97
28
TX
If you have a welder, plasma cutter, grinder, stock steel, a mag drill, milling machine, lathe, millwright skills and a heated shop the chinese equipment is a great deal.
The only thing on that list I don't have yet is a mag drill.
 

biketopia

Active member

Equipment
B2650, RK 60" BB, 42" tiller, 72" LP FM, Forks, Grapple, FEL
Feb 15, 2024
143
84
28
Warrenton VA
Any update? I have a stand of white pine that drop sticks, limbs, needles, and cones like it's their job. Kind of thinking one of these would help clean up that area without getting to wild.