Having fuel problems. losing RPM and stalling. I will need to replace filters for sure. My inquiry is when it comes to the fuel pump. 2017 BX25D has two fuel filters, one near the tank and one just before injector pump, the fuel pump is just after the fuel tank filter. While this was factory installed it has never been plugged in because there is no plug on the wiring harness to plug into. Is this common? Strange that they put the pump in but power supply. This is the first fuel trouble since new in 2017.
Fuel pump
- Thread starter smacneil
- Start date
If it is a fuel pump it needs power to operate. If it's never had power it may very well be a primary filter and a secondary filter up further towards the IP. Maybe one of the "filters" you describer is actually a lift pump?
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
It is clearly a fuel pump but don't know why it was supplied on the machine without a plug on the harness to power it. Tractor is again running well with out. To be clear The tractor works very well. Just curious if it is a common thing to have the pump supplied without power provision.
GreensvilleJay
Well-known member
Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
wow, you're lucky..but BX23D is like my BX23S...
fuel tank--->filter--_>lift pump--->filter--->inj pump
I suspect that between gravity and injpump sucking ,there's just enough flow to get her started.
Also think the power wire is tucked up the the harness,maybe taped in and hidden ?
If you look a little left and up from brake pedal,you'll see the pump AND the wiring harness.
fuel tank--->filter--_>lift pump--->filter--->inj pump
I suspect that between gravity and injpump sucking ,there's just enough flow to get her started.
Also think the power wire is tucked up the the harness,maybe taped in and hidden ?
If you look a little left and up from brake pedal,you'll see the pump AND the wiring harness.
I opened the loom on the harness and looked everywhere possible but no power supply plug. It's running like a charm again as usual since 2016, no power problem so all is good. Just going with the filter change and happily tractor on. Thanks
