Just wanted to show you what I am using. I can't take credit for the design, welding, or any other part of it, other than buying a truck trailer hitch at a swap meet. It was late in the day and I had been looking for a trailer hitch to modify and everyone that I looked at the sellers thought that they were gold. This particular one was new, and while I was looking at it, the seller asked me if I wanted to make an offer on it. I told him that I was certain that what I would offer would be more of an insult than a fair offer. He told me to make the offer, so I jokingly offered him $5, and to my surprise, he said, "You just bought yourself a trailer hitch! I am tired of dragging that from one swap meet to another and no one even wants to make me an offer." I did have to buy the 2 pins for the sides, and I think that they were $7.50 each plus tax, so all in I figure about $20 including buying my friend a beer. Would have bought him a case, but he is trying to cut down on his beer drinking at home.
The 3-point hitch adjustable bars I made about 18 years ago when someone on TBN showed that they were available from Kubota on one of the larger tractors. They had to be modified by doing some cutting and grinding to make them fit. I am extremely happy with them.
The 3-point hitch adjustable bars I made about 18 years ago when someone on TBN showed that they were available from Kubota on one of the larger tractors. They had to be modified by doing some cutting and grinding to make them fit. I am extremely happy with them.