Oil pressure

[Adam Wesley chambers]

I have a 2014 kubota grand l 3560...it had been sitting for about 2 weeks..I started it up and it threw me a oil temp sensor ng alarm...was told to reset it and see if it came back...I did that and it came back...any advice on where it's located or what to do without taking it to the dealer

 

[Bearcatrp]

Oil level good? Oil contaminated?

 

[DustyRusty]

Has a mouse chewed the wires?

 

[GreensvilleJay]

I wouldn't think Georgia would be that cold ,though they have had chilly weather in the past.
What temperature does the alarm go off at ? Is the display a constant xxx degrees or does it go up when engine gets warm ??
Mice are NOT 'tractor friendly'......

 

[Adam Wesley chambers]

I wouldn't think Georgia would be that cold ,though they have had chilly weather in the past.
What temperature does the alarm go off at ? Is the display a constant xxx degrees or does it go up when engine gets warm ??
Mice are NOT 'tractor friendly'......

It's been warm all year...its was around 80 degrees when it did this and I had only been running it literally maybe 1 to 2 minutes...engine temp hasn't even had time to come up

 

[Adam Wesley chambers]

Haven't noticed any

Has a mouse chewed the wires?

Oil is dirty gonna change it ne

Oil level good? Oil contaminated?oil is dirty ...gonna change it next week and see if it goes away

 

[GreensvilleJay]

well I'm confused...
is the alarm for oil temperature or oil pressure ?
if so what are normal readings and the alarm readings ??

 

[Adam Wesley chambers]

All it says is oil sensor ng

 

[lmichael]

Yeah, thread title says "oil pressure"

 

[fried1765]

All it says is oil sensor ng

Nope!
From the picture, it very clearly says: "Oil TEMP Sensor NG"!

 

[cthomas]

Get a WSM and start checking wires, I suspect something has chewed the wiring.

 

[cthomas]

ng equals no good maybe?

 

[DustyRusty]

86 Error Code For Kubota Tractor Models
There is 1 kind of error description.
Description:
Wheel Slip Signal is failed in the Instrumentation Controller
Partial frosting and sweating of lines combined with poor cooling, fan belt slipping, loss of refrigerant, restricted or clogged liquid line or expansion valve malfunctioning.

Kubota 86 Error Code | TractorErrorCode.com

Check 86 tractor error code and compare descriptions of 86 code with other tractor brands.

kubota.tractorerrorcode.com

 

[Adam Wesley chambers]

Yeah, thread title says "oil pressure"

My bad