400 Hr Service

LarryBud

Active member

Equipment
L3130
Dec 5, 2020
241
127
43
Cleveland, MO
My L3130 just hit 400 hrs.

I priced up the cost of the recommended parts for a DIY 400 hr service from my local Kubota dealer and I'm looking at >$600 for filters and fluids.

I'm tempted to go off brand but then, it will be a while until the next service. Anyone have thoughts Kubota brand vs less expensive alternatives? Filters and fluids.
 

nbryan

Well-known member

Equipment
B2650 BH77 LA534 54" ssqa Forks B2782B BB1560 Woods M5-4 MaxxHaul 50039
Jan 3, 2019
1,232
763
113
Hadashville, Manitoba, Canada
Use the Kubota stuff. Really not worth the risk using off brand. And even if you found equal quality and spec parts and fluids (you likely will not) they'd cost the same anyway.
This forum is riddled with talks about this subject.
Other than a few members here finding their non-kubota hydraulic fluid as workable, you 'll find out there's no support for going off-brand with any filters.
 
  • Like
Reactions: 1 user

GreensvilleJay

Well-known member

Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
Apr 2, 2019
11,419
4,908
113
Greensville,Ontario,Canada
dang, really 20 year old tractor with only 400hrs ?? Well tractordata says....

Use Kubota fluids and filters..only $120 for filters,rest must be oils....
 

85Hokie

Moderator
Staff member
Lifetime Member

Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Jul 13, 2013
10,746
2,551
113
Bedford - VA
My L3130 just hit 400 hrs.

I priced up the cost of the recommended parts for a DIY 400 hr service from my local Kubota dealer and I'm looking at >$600 for filters and fluids.

I'm tempted to go off brand but then, it will be a while until the next service. Anyone have thoughts Kubota brand vs less expensive alternatives? Filters and fluids.
The real question comes down to dollars and cents.

Lets say you go with another "brand" and the total cost is reduced by $150 total.

I'm thinking your next fluid change is? 600 hours?

SO for a mere 75 cents per hour you will have the "correct" materials being used.

And almost zero chance of something going sideways. ;)
 

SDT

Well-known member

Equipment
multiple and various
Apr 15, 2018
3,255
1,042
113
SE, IN
My L3130 just hit 400 hrs.

I priced up the cost of the recommended parts for a DIY 400 hr service from my local Kubota dealer and I'm looking at >$600 for filters and fluids.

I'm tempted to go off brand but then, it will be a while until the next service. Anyone have thoughts Kubota brand vs less expensive alternatives? Filters and fluids.
I use (and always have used) only Kubota filters.

I use Kubota oils in anything that has a HST, electronic injection and/or DPF.

I use any name brand diesel spec engine oil in my 30+ year old B1750.

All engines are changed each fall regardless of accumulated hours.

No issues.
 
  • Like
Reactions: 1 user

N3BP

Active member

Equipment
B7200DT, B7200HST-D, L2900GST, L3010 HST TLB
Sep 20, 2016
471
197
43
Lebanon, PA
Just did that on my L3010 last year and was north of $700. It hurts Larry, but look at this way.....You're saving hundreds of dollars by preforming the labor yourself. Bottom line....do not use anything but Kubota oils and filters.
 

N3BP

Active member

Equipment
B7200DT, B7200HST-D, L2900GST, L3010 HST TLB
Sep 20, 2016
471
197
43
Lebanon, PA
dang, really 20 year old tractor with only 400hrs ?? Well tractordata says....

Use Kubota fluids and filters..only $120 for filters,rest must be oils....
You bet, the L series hold several hundred dollars worth of sUDT
 

6869704x4

Well-known member

Equipment
L45TLB, 49 8N, 57 641, RTV-X1120D, Z422
Jun 29, 2011
325
426
63
SE, NM
I'm curious what fluid Kubota called for 20 years ago on that tractor. My L45 manual says UDT or SUDT
 

85Hokie

Moderator
Staff member
Lifetime Member

Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Jul 13, 2013
10,746
2,551
113
Bedford - VA
I'm curious what fluid Kubota called for 20 years ago on that tractor. My L45 manual says UDT or SUDT

Well, back in the 1950's most tractors ran on straight 30 weight oil. Simply because it was the best oil available. 20 years ago big K ran on UDT and then ..... a new oil was "invented" - thus SUDT, and now we use a newer still oil , S-UDT2!

Oil technology like computer technologies have come a hellva long way in the last 70 years.

I find it somewhat demented that tractor owners with very old equipment still run the antiquated oils. And their first statement is ....... "it still works, why change?"

Manuals that were printed in the past, had no future to go by - and if some of live long enough, our grandchildren will look at us and say "pops - that technology is old school, this(whatever this is) is SO much better!