I get bored easily.....Then the drinks start flowing....Then I say, hold my drink, and watch this.....

The Evil Twin

Well-known member

Equipment
L2501, LA526,
Jul 19, 2022
2,817
2,830
113
Virginia
@D2Cat has the ticket. Linseed oil. Use it in all the teak trim pieces on the boat. Including the swim platform. Once a year and the platform sits in water. Still golden brown after 20 years.
 
  • Like
Reactions: 1 user

D2Cat

Well-known member
Lifetime Member

Equipment
L305DT, B7100HST, TG1860, TG1860D, L4240
Mar 27, 2014
13,829
5,580
113
40 miles south of Kansas City
I got 1 1/2" green oak board at the saw mill years ago for my trailer and applied linseed oil yearly for the lasted 30 years. I only replaced them because one board split out right where my trencher tire set when loaded, so I replaced them all. Still have the boards at the barn for another project.
 

WFM

Well-known member
Premium Member

Equipment
L3800
Apr 5, 2013
1,342
671
113
Porter Maine
I've always wanted to try the used motor oil on my trailer decks. But never have.
This is a 9 yr old aluminum frame 6 x 12 foot, the deck was five quarter presser treated decking. Rotted after 9 yrs.
I have a 8 x 22' aluminum frame car hauler I bought to move my kubota I think I've used three times. That has 2" decking I believe.
I guess I might want to put some sealer/water proofing on that.
 

Attachments

Toyman

Active member

Equipment
B7100HST, 1630, 4' Tiller, 4' Brush Hog; Mahindra 5005/Loader, Woods Cadet 84,
Apr 15, 2019
120
104
43
Pittsburgh
I did the waste oil and diesel (50/50) on my new 18’ car hauler earlier this summer. The method I read about was to apply and let it soak in, and then let it sit in the sun for a few days to dry. It worked well for me, didn’t even leave an oily residue if I touched or sat on the deck.
 
  • Like
Reactions: 1 user

OntheRidge

Well-known member
Lifetime Member

Equipment
Kubota L47 TLB, Homestead 55" grapple, LP 1684 rear blade, WR Long 84" snowplow
Nov 1, 2020
328
382
63
25427
Hopefully you are not on a well, motor oil gets in groundwater. as does diesel, etc...
 

Henro

Well-known member

Equipment
B2910, BX2200, KX41-2V mini Ex., Beer fridge
May 24, 2019
5,782
2,968
113
North of Pittsburgh PA
Your thread title finally sunk in, and I realized if we lived close by, we could be really good friends!

I'd always be there to ask "Time for me to hold your drink yet?"

Endless possibilities for enjoyment...LOL
 

Runs With Scissors

Well-known member

Equipment
L2501 TLB , Grappel, Brush Hog, Box Blade, Ballast box, Forks, Tiller, PH digger
Jan 25, 2023
2,442
2,818
113
Michigan
Your thread title finally sunk in, and I realized if we lived close by, we could be really good friends!

I'd always be there to ask "Time for me to hold your drink yet?"

Endless possibilities for enjoyment...LOL
Yea, I am real "kick in the pants" at parties too..... ;)
 

The_Wingnut

Member
Lifetime Member

Equipment
Grand L4060, ZD21, ZD28, ZD331, RTV X1100C, Branson 3820, JD 1020, JD 50
Dec 8, 2021
91
63
18
61
Tyner, NC
I did the waste oil and diesel (50/50) on my new 18’ car hauler earlier this summer. The method I read about was to apply and let it soak in, and then let it sit in the sun for a few days to dry. It worked well for me, didn’t even leave an oily residue if I touched or sat on the deck.
I did the same with my trailer that has treated lumber decking. Worked great and despite my concerns it did not drip, become slippery or leave residue on clothes when I sit on it. It was absorbed into the wood and it's been over a year and still looks great. I'm thinking next year I'll re-coat just for protection. I used Hyd. oil just because it didn't have that dark black used diesel oil look. Also used it to treat the siding extension boards on my dump trailer. A day after applying got a frog chocker rain and there was no runoff residue down the side of the trailer.
 
  • Like
Reactions: 1 user

OntheRidge

Well-known member
Lifetime Member

Equipment
Kubota L47 TLB, Homestead 55" grapple, LP 1684 rear blade, WR Long 84" snowplow
Nov 1, 2020
328
382
63
25427
I wonder how long it would take the oil to reach the ~450 feet depth my aquifer sits at.
I don't know, but why would you even take that chance? It will pollute someone's water.
 

NCL4701

Well-known member

Equipment
L4701, T2290, WC68, grapple, BB1572, Farmi W50R, Howes 500, 16kW IMD gen, WG24
Apr 27, 2020
2,803
4,251
113
Central Piedmont, NC
I don't know, but why would you even take that chance? It will pollute someone's water.
To each their own, but 50 years ago only about half the roads here were paved so DOT routinely used 10 wheel tank truck sprayers to spray the roads with used motor oil to control dust. If me dripping a pint of oil on the ground while mopping it on a trailer deck is going to contaminate the drinking water, everyone here is pretty much already screwed anyway. That said, yes I turn in waste oil to be recycled.