BonnySlope
Active member
Equipment
BX2380FEL, Add-A-Grapple, Titan 48" Box scraper, 60" Rake, 72" Rear Blade, Flail
Finished torquing bolts on my new 41" FH-EFGC Flail mower and then on to cutting and setting up PTO shaft after lifting mower from steel pallet base and leveling.
I was going to wait till tomorrow am, I couldn't. I left factory cut height for roller and skids all the way up. Went out and did a couple passes. One along the edge of field and into woods, I'd like to do an inch higher adjustment or maybe not it'll break down a lot of the windblown material in the woods. On the grass I cut it's to short, I cut my field with a zero turn set to 4" which controls unwanted growth, and it has a 54" cut not 41" like the flail mower. I threw a tape on mower. The housing is 41" plus belt housing
could of went slower to break up/down wood better.
In the short test it's a blast, It'll take a dusk mask while reclaiming tree line. There were a few things that were different then what's state on manufactures web site. 517 lbs. crated weight, posted 570lbs. BX purred in woods on the little stretch I did on 2 and 3 branch's on ground. Mask is needed.
I was going to wait till tomorrow am, I couldn't. I left factory cut height for roller and skids all the way up. Went out and did a couple passes. One along the edge of field and into woods, I'd like to do an inch higher adjustment or maybe not it'll break down a lot of the windblown material in the woods. On the grass I cut it's to short, I cut my field with a zero turn set to 4" which controls unwanted growth, and it has a 54" cut not 41" like the flail mower. I threw a tape on mower. The housing is 41" plus belt housing
![Flail_Mower_adjustment (3).jpg Flail_Mower_adjustment (3).jpg](https://www.orangetractortalks.com/forums/data/attachments/106/106430-a621b7f10f0a6279900af70a2869f07b.jpg)
![Flail_Mower_adjustment (1).jpg Flail_Mower_adjustment (1).jpg](https://www.orangetractortalks.com/forums/data/attachments/106/106431-9f1b043b21484cdaa052c90651ed98a2.jpg)
![Flail_Mower_adjustment (4).jpg Flail_Mower_adjustment (4).jpg](https://www.orangetractortalks.com/forums/data/attachments/106/106432-c4a7a014ddea3df95ab217515ef0d73f.jpg)
![Flail_Mower_adjustment (2).jpg Flail_Mower_adjustment (2).jpg](https://www.orangetractortalks.com/forums/data/attachments/106/106433-038ce52eb5e294530b18c3f0dea2d147.jpg)
![Flail_Mower_adjustment_cut (5).jpg Flail_Mower_adjustment_cut (5).jpg](https://www.orangetractortalks.com/forums/data/attachments/106/106435-fcd0edc3f3e03191003867b32954a4d1.jpg)
Last edited: