What did you do to or on your Kubota today?

[radas]

The bracket levers are the control sticks for the backhoe. If you have the flip seat, those look like to correct sticks. Separate seat uses short/straight sticks. Not sure where the knobs are.

the SMV triangle is supposed to go on the dipper of the hoe. Don't bother with it. It'll just peeve you off when digging deep ditches.

I can't tell what that other item is in the clear bag. Unrecognizable to me.

Ahhh that makes sense, I wonder if the BH77 will come with the straight control levers that I need when I add the seat.

I plan on just installing the 2nd seat on the BH77 without the extension brackets for the cab just by scooting the tractor suspension seat forward. I've seen it done a few times now that I'm comfortable ordering the extra parts if it doesn't already come on the BH77.

I have no idea what that trapezoid is either... We'll see when the instructions arrive.

Did your BH77 come with the female pressure fittings to install on the flex/power beyond rigid hoses? Mine didn't come with any fittings or banjo bolts, only washers and o rings.

 

[Fordtech86]

1. What are the two black bracket levers? for?

the back hoe probably has the short levers on it for the models that have the seperate seat on the hoe, those are the replacements for the models that have the flip around seat

edit: didn’t see dirty deeds response

 

[radas]

the back hoe probably has the short levers on it for the models that have the seperate seat on the hoe, those are the replacements for the models that have the flip around seat

edit: didn’t see dirty deeds response

Thanks, that's good news... One less part I have to buy when adding the cab seat.

I saw a video online where a guy installed the BH77 on his B2650 without removing the wheels by pre-inserting the bolts before lining up the subframe with the axle housing... I'd prefer not to take my loaded rear tires off if I can help it. On the other hand, I debated on taking them off anyway to add brotek spacers in 2 or 3"... Decisions, decisions.

 

[MOOTS]

"Hopefully attract some bees"

Why not GET some bees of your own?
A fun project,........ and bees do well in GA.

FIL has some old hives. May clean them up some and see what happens.

 

[Fordtech86]

Thanks, that's good news... One less part I have to buy when adding the cab seat.

I saw a video online where a guy installed the BH77 on his B2650 without removing the wheels by pre-inserting the bolts before lining up the subframe with the axle housing... I'd prefer not to take my loaded rear tires off if I can help it. On the other hand, I debated on taking them off anyway to add brotek spacers in 2 or 3"... Decisions, decisions.

Not sure about the b/lx, but I didn’t remove the wheels on mine when I installed the subframe.

just be aware too there isn’t much room with the separate seat on the hoe, even for a little guy

 

[dirtydeed]

View attachment 100422
We have three millstones, all of a different type, on the property. Didn’t used to ever move them, at least partly because we had nothing to move them with. Wife knows we can move them, so now they’re a viable option for rearranging once in a while. Moved this one from a natural area in our back yard to a more prominent location in front of the unoccupied house today.

I can picture Wilma asking Fred just how he lost his wheel.

 

[fried1765]

FIL has some old hives. May clean them up some and see what happens.

Bees are great, and very interesting to tend.
They do not require a lot of work, but do need periodic attention.

I had bees many years ago, and tried to renew the experience about 7 years ago.
It did not work for me.
I spend 6 months each year in Florida now, and my bees were in the cold Northland.
I tried to prep them for long Winter survival, but long, was just too long!

 

[fried1765]

Not sure about the b/lx, but I didn’t remove the wheels on mine when I installed the subframe.

just be aware too there isn’t much room with the separate seat on the hoe, even for a little guy

View attachment 100490

I just LOVE that picture!

 

[NCL4701]

Bees are great, and very interesting to tend.
They do not require a lot of work, but do need periodic attention.

I had bees many years ago, and tried to renew the experience about 7 years ago.
It did not work for me.
I spend 6 months each year in Florida now, and my bees were in the cold Northland.
I tried to prep them for long Winter survival, but long, was just too long!

Take them with you. They’d rather over winter in Florida, too!

 

[dirtydeed]

Ahhh that makes sense, I wonder if the BH77 will come with the straight control levers that I need when I add the seat.

I plan on just installing the 2nd seat on the BH77 without the extension brackets for the cab just by scooting the tractor suspension seat forward. I've seen it done a few times now that I'm comfortable ordering the extra parts if it doesn't already come on the BH77.

I have no idea what that trapezoid is either... We'll see when the instructions arrive.

Did your BH77 come with the female pressure fittings to install on the flex/power beyond rigid hoses? Mine didn't come with any fittings or banjo bolts, only washers and o rings.

Mine was assembled by the dealer (so it was all plumbed)...but it had the short sticks. They swapped them out for me for the long/bent ones.

Short Sticks:

Long sticks:

 

[Trapper Bob]

I hung the gates today for the watering lane. I played firefighter for awhile too. Dang wind!

 

[D2Cat]

Now Bob, you should know better than light a fire with 40 MPH winds!!!

 

[Fordtech86]

2. What is this orange trapezoid bracket for?

looks like this maybe

 

[radas]

Thanks @dirtydeed @Fordtech86

I just did some digging, the male/female pressure fittings supposedly come with the BH77 and not in the subframe kit... Very odd.

 

[6869704x4]

Not sure about the b/lx, but I didn’t remove the wheels on mine when I installed the subframe.

just be aware too there isn’t much room with the separate seat on the hoe, even for a little guy

View attachment 100490

Better than any video game

 

[6869704x4]

Fixing a leak. T

 

[MOOTS]

Not sure about the b/lx, but I didn’t remove the wheels on mine when I installed the subframe.

just be aware too there isn’t much room with the separate seat on the hoe, even for a little guy

View attachment 100490

My little guy will be 3 this month. Can’t wait to get him on the tractor, just like dad did with me. His almost 7 yo sister wants nothing to do with the tractor…

 

[radas]

My little guy will be 3 this month. Can’t wait to get him on the tractor, just like dad did with me. His almost 7 yo sister wants nothing to do with the tractor…

It's an awesome experience. My boy is a few months older than yours and he has been going on zero turn and tractor rides since the age of 2. He also enjoys sitting on the LX when it's parked in the garage (I make sure the loader is locked and the hydraulic pressure has been relieved) and puts the seat belt on and pretends to do work.

 

[fried1765]

It's an awesome experience. My boy is a few months older than yours and he has been going on zero turn and tractor rides since the age of 2. He also enjoys sitting on the LX when it's parked in the garage (I make sure the loader is locked and the hydraulic pressure has been relieved) and puts the seat belt on and pretends to do work.

Those are such precious times.
Enjoy!

 

[Fordtech86]

My little guy will be 3 this month. Can’t wait to get him on the tractor, just like dad did with me. His almost 7 yo sister wants nothing to do with the tractor…

we have fights over the tractor. I always lose

blessed that both kids would much rather be outside then sitting around the house watching tv/video games!