Pro Works pallet forks

[PoTreeBoy]

I'll measure it later. The top is tapered, it can only be so thick and fit in the fork bracket. It also has some additional meat further down. Looks very similar to the picture of the Pro Works.

The notched top bar is about 1/2" thick, beveled to 1/4" at the top. Behind and below that is a 3"x3" square tube. (It's from China, so dimensions are approximate.) The third piece is the SSQA adapter cross piece angle. Not shown is the back stop, it doesn't have one .

 

[fried1765]

The notched top bar is about 1/2" thick, beveled to 1/4" at the top. Behind and below that is a 3"x3" square tube. (It's from China, so dimensions are approximate.) The third piece is the SSQA adapter cross piece angle. Not shown is the back stop, it doesn't have one .
View attachment 96002

The "back stop" or head rack is a big deal to me.
Most forks do have a "back stop" but it is not flush with the back of the forks.
I bought the EA forks, because the fork backs ARE flush with the face of the "backstop".

 

[Mrlunchbox]

The "back stop" or head rack is a big deal to me.
Most forks do have a "back stop" but it is not flush with the back of the forks.
I bought the EA forks, because the fork backs ARE flush with the face of the "backstop".

I agree, I have moved some taller items with my folks and the items want to tip back because the forks are proud of the rack. Not a deal breaker but flush sitting ones would've been much better.

 

[ChristopherHM]

Made a trip up to TractorMax to lay my eyes on the ProWorks frame . Upper rail was indeed 1/2” but the overall fitment and welds really didnt impress me . Looked at a few other brands that were available and settled on CID X-treme Attachments fork frame . Fits great and the powder coat is close enough to Kubota gray.

 

[North Idaho Wolfman]

Much better implemented steps too!

 

[fried1765]

Made a trip up to TractorMax to lay my eyes on the ProWorks frame . Upper rail was indeed 1/2” but the overall fitment and welds really didnt impress me . Looked at a few other brands that were available and settled on CID X-treme Attachments fork frame . Fits great and the powder coat is close enough to Kubota gray. View attachment 96394 View attachment 96395 View attachment 96396 View attachment 96397

Steps are good.
Fork backs being very proud of backstop....not so good.