Air filter clogged with snow

Zach05855

New member

Equipment
B2650
Nov 24, 2020
5
3
3
Foothills , Alberta
I now have had some time to fully try out the covers from David. We received about a foot of snow this week with drifts of almost to the height of my snow blower intake.

I have a substantial driveway and parking area, all in total about 30,000 sq ft. Total time to clear the area was around 4 to 5 hours.

Normally my engine temps would be 1 bar with some occasional 2 bar temps under heavy load. With average ambient temps in the -5c to -10c ( 23f - 14f ). Now operating with the covers in place, my engine temps are 3 bars with some 4 bars under heavy loads. Actual ambient temperature was -5c ( 23f ). Cabin temps were noticeably warmer, so had to keep my air temp dial at about the first 1/3 rd of the scale.

Below are my before and after pictures of the engine area.

20201111_115734.jpg
20201111_115730.jpg


After, with the addition of the covers

20201222_165332.jpg
20201222_165216.jpg




I was initially concerned about engine overheat, Now I am fully satisfied and have no concerns what so ever.

The covers are in my opinion a great addition to our tractors and a must if you have a front mount snow blower.
 

Zach05855

New member

Equipment
B2650
Nov 24, 2020
5
3
3
Foothills , Alberta
Zach, after looking at your photos again, it appears that you may have a hydraulic leak on your hose or cylinder for raising your blower. There is a yellow patch of snow right under the cylinder in your first picture. You may want to check for leaks.

Good eyes, I do indeed have a slight leak from the cylinder. I am hoping to wait until after the winter before getting it rebuilt.
 
  • Like
Reactions: 1 user

bird dogger

Well-known member
Vendor Member

Equipment
Kubota B2650 and lots of other equipment
Feb 24, 2019
1,598
1,456
113
North Dakota
Zach, Glad those covers are working great for you!! Those are super pictures in your post #24. Especially the last one where you can definitely see the difference in the temperature under the hood: The front end of the hood is frosty, but directly above and in back of the radiator the hood is completely clear of any snow or frost indicating a warm engine compartment. Slim chance of fuel gelling in a warm engine compartment.

In the other “before” pic it looks like there is some frozen ice in your A/C condenser which can’t be good for that component if it’s solid ice from front to back in any area. It looks like the covers kept the front end warm enough to prevent that from happening again.

Thanks for the update, Zach! With your set of covers and that super nice cab you’ll be able to take on snow removal in any conditions!
 

Iguide

Member
Lifetime Member

Equipment
L 6060 With all the bells & wistles I can muster, 5/ll & Lown performance protec
One thing I see over and over again. Is tractors with snowblowers that cost LOTS of money have a fair amount of mechanical problems. If you have gravel drive well,,, you know... Why do you folks keep buying those things??? All my life I have used a plow on the front of my tractor yes a hydraulic one and never have the problems that I see here in the forums. Their cheaper & quicker also never mind being sturdier to use.
 

RCW

Well-known member
Lifetime Member

Equipment
BX2360, FEL, MMM, BX2750D snowblower. 1953 Minneapolis Moline ZAU
Apr 28, 2013
9,134
5,193
113
Chenango County, NY
One thing I see over and over again. Is tractors with snowblowers that cost LOTS of money have a fair amount of mechanical problems. If you have gravel drive well,,, you know... Why do you folks keep buying those things??? All my life I have used a plow on the front of my tractor yes a hydraulic one and never have the problems that I see here in the forums. Their cheaper & quicker also never mind being sturdier to use.
Iguide - you’re responding to a thread that’s 2 years old.

I’m a guy with a stone driveway and have used a snowblower for 31 years.

I had a walk behind for 10 years, a front mount on a JD 425 for another 11, then the front mount on my BX Kubota for another 10. I think I’m pretty well-versed…. ;)

Pretty good at knowing the driveway base I need. Pretty good at knowing when to pull snow off, and when to build a base. Modified blower shoes so they don’t dig in.

I don’t have room to push snow out of the way.

The reason I keep buying snowblowers is I have no other option…..

Appreciate your contribution. 😉
 
  • Like
Reactions: 2 users

GreensvilleJay

Well-known member

Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
Apr 2, 2019
11,401
4,899
113
Greensville,Ontario,Canada
this....
I don’t have room to push snow out of the way.

...is WHY I switched from plow to blower decades ago....

I can BLOW the first snow far,far away unlike a plow that'll just roll it over a few feet.
get 2-3 snows in a row and 1/2 my driveway would be 'lost' until springtime.
 
  • Like
Reactions: 1 users

ctfjr

Well-known member
Lifetime Member

Equipment
L3800HST
Dec 7, 2009
1,878
2,292
113
central ct
One thing I see over and over again. Is tractors with snowblowers that cost LOTS of money have a fair amount of mechanical problems. If you have gravel drive well,,, you know... Why do you folks keep buying those things??? All my life I have used a plow on the front of my tractor yes a hydraulic one and never have the problems that I see here in the forums. Their cheaper & quicker also never mind being sturdier to use.
The two blowers I have / had cost me less than my plow for the F350.

I have never had a mechanical problem with my blowers, both purchased used.

I have a 500' gravel driveway.

I plowed for several years. This issue as pointed out by previous posters is, at some point, I run out of room. A couple of years my 3 car garage shrunk to 2. Its perpendicular to the driveway. When the piles get big enough you end up beating the crap out of the truck trying to make room.
 
  • Like
Reactions: 1 user

Iguide

Member
Lifetime Member

Equipment
L 6060 With all the bells & wistles I can muster, 5/ll & Lown performance protec
Iguide - you’re responding to a thread that’s 2 years old.

I’m a guy with a stone driveway and have used a snowblower for 31 years.

I had a walk behind for 10 years, a front mount on a JD 425 for another 11, then the front mount on my BX Kubota for another 10. I think I’m pretty well-versed…. ;)

Pretty good at knowing the driveway base I need. Pretty good at knowing when to pull snow off, and when to build a base. Modified blower shoes so they don’t dig in.

I don’t have room to push snow out of the way.

The reason I keep buying snowblowers is I have no other option…..

Appreciate your contribution. 😉
Sounds like you've done it a couple of times. Here in northern NH I would say 85% or greater of those that use blowers on gravel, well have problems. I plowed snow with a pickup & tractor when my truck won't fit and being up here RARELY is there a lack of room for snow to be pushed to.

Mostly I was looking at Bird Dogs products because my new L6060 is not to warm in the cab and I talked to him last year before I got the tractor and that is why such a late .02$. Personaly I plow with that tractor and a RAM 5500 Western V Plow & Sander. Used to use a blower for the Church's walks. When I gave that up I said NEVER again. Love plowing !!! Hate blowing !!!!!!!!!!!!!!!!!
 

Iguide

Member
Lifetime Member

Equipment
L 6060 With all the bells & wistles I can muster, 5/ll & Lown performance protec
The two blowers I have / had cost me less than my plow for the F350.

I have never had a mechanical problem with my blowers, both purchased used.

I have a 500' gravel driveway.

I plowed for several years. This issue as pointed out by previous posters is, at some point, I run out of room. A couple of years my 3 car garage shrunk to 2. Its perpendicular to the driveway. When the piles get big enough you end up beating the crap out of the truck trying to make room.
& where do you live?
 

bird dogger

Well-known member
Vendor Member

Equipment
Kubota B2650 and lots of other equipment
Feb 24, 2019
1,598
1,456
113
North Dakota
Don't forget me in Saskatchewan.
My bad, saskydude!! Not sure how I missed your location ! Didn't mean to forget you!!!

How's this?:

My best friends in Canada! : Newfoundland/Labrador, Quebec, Ontario, Manitoba, Alberta and the Yukon Territory and of course, Saskatchewan!! :ROFLMAO:

I better check my list to make sure no one else is missing from the above. :unsure:
 
  • Like
Reactions: 1 user

nbryan

Well-known member

Equipment
B2650 BH77 LA534 54" ssqa Forks B2782B BB1560 Woods M5-4 MaxxHaul 50039
Jan 3, 2019
1,231
763
113
Hadashville, Manitoba, Canada
Zach, after looking at your photos again, it appears that you may have a hydraulic leak on your hose or cylinder for raising your blower. There is a yellow patch of snow right under the cylinder in your first picture. You may want to check for leaks.
My blower raise/lower cylinder just started leaking last year after 4 years of blowing snow here in SE Manitoba. I ordered a seal kit through Kubota and last week gave the cylinder to a local hydraulics shop for a re-build. I'm not versed at all in how to place those new and expensive bits of plastic in the seal kit into the various grooves where they need to go. I'd probably pooch the kit anyway so off to the pros it goes. No word back yet, they're real busy.
i mad some mods to my tractor's air inlet and rad screen to help deal with this very issue of the air filter snow clogging and rad ice and snow buildup with fluffy cold snow. Costed only a few minutes of my time, works fine so far.

Note how I notched the bottom lip of the air intake end. Allows for unrestricted air flow when tucked behind the rad, pic 2.
Warm weather position:
IMG_20221121_185001910.jpg
Snowblower weather position:
IMG_20221121_185304498.jpg
Tyvek rad screen winter cover:
IMG_20221121_185205351.jpg
 

bird dogger

Well-known member
Vendor Member

Equipment
Kubota B2650 and lots of other equipment
Feb 24, 2019
1,598
1,456
113
North Dakota
Sounds like you've done it a couple of times. Here in northern NH I would say 85% or greater of those that use blowers on gravel, well have problems. I plowed snow with a pickup & tractor when my truck won't fit and being up here RARELY is there a lack of room for snow to be pushed to.

Mostly I was looking at Bird Dogs products because my new L6060 is not to warm in the cab and I talked to him last year before I got the tractor and that is why such a late .02$. Personaly I plow with that tractor and a RAM 5500 Western V Plow & Sander. Used to use a blower for the Church's walks. When I gave that up I said NEVER again. Love plowing !!! Hate blowing !!!!!!!!!!!!!!!!!
Hi Iguide,
I just sent you a message about covers for your L6060. And here's '60 Series Covers & Pics that should fit your tractor perfectly.
David
 

BAP

Well-known member
Lifetime Member

Equipment
2012 Kubota 2920, 60MMM, FEL, BH65 48" Bush Hog, 60"Backblade, B2782B Snowblower
Dec 31, 2012
2,742
854
113
New Hampshire
Sounds like you've done it a couple of times. Here in northern NH I would say 85% or greater of those that use blowers on gravel, well have problems. I plowed snow with a pickup & tractor when my truck won't fit and being up here RARELY is there a lack of room for snow to be pushed to.

Mostly I was looking at Bird Dogs products because my new L6060 is not to warm in the cab and I talked to him last year before I got the tractor and that is why such a late .02$. Personaly I plow with that tractor and a RAM 5500 Western V Plow & Sander. Used to use a blower for the Church's walks. When I gave that up I said NEVER again. Love plowing !!! Hate blowing !!!!!!!!!!!!!!!!!
Sounds a lot like operator era with snowblower problems. I live in NH and get a lot of snow where I live. I blow approximately 3/4 of a mile worth of dirt driveway with my own and neighbors I do. Never really have any problems once I got my blower set appropriately for gravel. My grandfather snowblowed his driveway for 40 years with a Allis Chalmers B-10 garden tractor with front blower on a gravel driveway without problems. Snowblowing on gravel is different than pavement, but if you take the time to set it up the blower appropriately for it, it works fine. Plowing on gravel can cause just as much problems as snowblowing if all you do is bull jam. Each has it’s own issues but a good operator, not one that just jam’s their way through them, with learn how to make each work.
 
  • Like
Reactions: 2 users

saskydude

Member

Equipment
B2601, FEL, BH70, HLA 1500, K54-22-06. PFL-1242
Nov 23, 2020
63
37
18
Saskatchewan, Canada
My bad, saskydude!! Not sure how I missed your location ! Didn't mean to forget you!!!

How's this?:

My best friends in Canada! : Newfoundland/Labrador, Quebec, Ontario, Manitoba, Alberta and the Yukon Territory and of course, Saskatchewan!! :ROFLMAO:

I better check my list to make sure no one else is missing from the above. :unsure:
[/QUOTE

LOL, perfect. :D(y)
 

lugbolt

Well-known member

Equipment
ZG127S-54
Oct 15, 2015
5,205
1,889
113
Mid, South, USA
i used to have a blower. And a blade for the MF tractor (that's massey ferguson, BTW). What little snow we got, I'd blow it or just move it. Few years ago I moved to a different place, longer driveway. But got into a pickle and sold the blade and snow thrower. I don't miss it either. Just more stuff to have to work on. If it snows, which is rarely does here, I just drive the truck. 18" last year at the house, drove to work just fine but I am not sure I'd want to drive in much more than that.

and....if I had kept the blower and blade, the 'neighbors' would be wanting to borrow it every time it snows. Like a trailer, or tractor, you will always have "friends" if you have either one of those.
 
  • Like
Reactions: 1 user