T1600 start up

WW5RM

New member

Equipment
T1600
Aug 28, 2022
3
0
1
Texas
My T1600 won't start without at least half throttle. It idles fine and runs fine.

Any ideas?

Thanks

RM
 

Torinodan

Active member

Equipment
T1600, G4200, G5200, Ford 2810, 1974 Wheel Horse C100
Oct 14, 2021
199
94
28
Fayetteville GA
I turn mine over with no throttle then increase till it starts. The owners manual says to start at half throttle but it always seemed to start rough doing it like that so I start at 0 then increase to run. No smoking and smooth.
I start all of my small kubotas the same now
 
Last edited:
  • Like
Reactions: 1 user

WW5RM

New member

Equipment
T1600
Aug 28, 2022
3
0
1
Texas
I turn mine over with no throttle then increase till it starts. The owners manual says to start at half throttle but it always seemed to start rough doing it like that so I start at 0 then increase to run. No smoking and smooth.
I start all of my small kubotas the same now
Yes but what I'm saying is mine will not start unless it's at half throttle. Glow plugs seem to be working. I'm wondering if my injectors might be the issue.
 

Torinodan

Active member

Equipment
T1600, G4200, G5200, Ford 2810, 1974 Wheel Horse C100
Oct 14, 2021
199
94
28
Fayetteville GA
When was the last time the fuel tank was cleaned out? I had another T1600 that had a lot of fungus in the tank blocking the pickup pump. Filters?
 
  • Like
Reactions: 1 user

WW5RM

New member

Equipment
T1600
Aug 28, 2022
3
0
1
Texas
When was the last time the fuel tank was cleaned out? I had another T1600 that had a lot of fungus in the tank blocking the pickup pump. Filters?
I got a filter on the way. It looks fine but no telling how old it is. I take a look at the tank.

Thanks!
 

lugbolt

Well-known member

Equipment
ZG127S-54
Oct 15, 2015
5,207
1,893
113
Mid, South, USA
check the fuel shutoff solenoid. Sometimes they stick and cause this exact issue. If not the solenoid itself see if the shutoff lever is sticking in the speed control assembly. If it is, lube it. Can't really lube the solenoid; well you can but it really doesn't do much. Replace it if it's stickin.
 
  • Like
Reactions: 1 user