Stationary PTO switch doesn’t work MX6000

troverman

Well-known member

Equipment
MX6000 HSTC; 2020 Kubota Z421KW-54 zero turn mower
Jun 9, 2015
1,188
275
83
NH
Unless I’m doing something wrong. I know the switch is connected to something because when the tractor starts and the gauges do their little sweep and all the warning lights turn on for a second…that stationary pto switch lights up then goes out. But no matter what I do, I can’t make it light up by pushing it. I’ve tried parking brake on, HST in neutral, and a combination of the two. No go. The manual doesn’t explain it, probably in part because the older Mx models didn’t have it.
 

RCW

Well-known member
Lifetime Member

Equipment
BX2360, FEL, MMM, BX2750D snowblower. 1953 Minneapolis Moline ZAU
Apr 28, 2013
9,164
5,270
113
Chenango County, NY
I’m not much help, but there’s something with folding the seat up on the little tractors…..you think there’s any chance that could be in play?
 

troverman

Well-known member

Equipment
MX6000 HSTC; 2020 Kubota Z421KW-54 zero turn mower
Jun 9, 2015
1,188
275
83
NH
The whole point of the button was to avoid flipping the seat forward, I thought
 

Dave_eng

Well-known member
Lifetime Member

Equipment
M7040, Nuffield 465
Oct 6, 2012
5,236
1,018
113
Williamstown Ontario Canada
Your Operators manual may not be the latest edition. Try searching on Kubota's web site. Because I am in Canada I am partially blocked by their site.
Alternatively, go to a Kubota dealer and bring a USB stick. Ask for a copy of the Operators' Manual for your machine.
Is your PTO turn on switch a yellow knob which you push in and turn to engage and just push to disengage?
Dave
 

mcmxi

Well-known member
Lifetime Member

Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25DLB
Feb 9, 2021
5,339
6,359
113
NW Montana
Unless I’m doing something wrong. I know the switch is connected to something because when the tractor starts and the gauges do their little sweep and all the warning lights turn on for a second…that stationary pto switch lights up then goes out. But no matter what I do, I can’t make it light up by pushing it. I’ve tried parking brake on, HST in neutral, and a combination of the two. No go. The manual doesn’t explain it, probably in part because the older Mx models didn’t have it.

I made a post about this back in April.

" I wanted to get out of the cab with the flail mower running but I guess the stationary PTO switch operation wasn't intuitive enough for an idiot like me. I tried pushing it and even holding it down when the PTO was running which didn't work, but what I didn't try is holding the button down for 3 seconds BEFORE engaging the PTO clutch. Like that's obvious!

 

mcmxi

Well-known member
Lifetime Member

Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25DLB
Feb 9, 2021
5,339
6,359
113
NW Montana
It's in the manual.

mx_pto.png
 

troverman

Well-known member

Equipment
MX6000 HSTC; 2020 Kubota Z421KW-54 zero turn mower
Jun 9, 2015
1,188
275
83
NH
Thanks. Guess I didn’t read the manual close enough