Small Offset Flail-type Mower?

[River19]

Is there such a thing as a small offset flail mower that would run on a B2601?

I have a couple use cases for this.............I have a long 600'(ish) driveway and I would like to periodically cut the weeds back along the edges without having to manually hit it with the string trimmer which is a PITA. I also have a couple hills with rough cover (ie. grasses, weeds, wild flowers, etc.) that need to be maintained as I will be having a solar array installed on one hill.

A rotary cutter would work for the hills but the sides of the driveway would really require an offset to not roll into the ditch......ideally.....

I know the ditch mowers are awesome but they would cost me > $50K as I would need a tractor upgrade and that isn't happening lol (love the 2601).

Any thoughts?

 

[Elliott in GA]

Yes - the good and bad

 

[JimmyJazz]

You can often find used tractors with flail mowers for sale on tractorhouse.com often priced relatively inexpensively. Type flail under keyword. Might be worth a look.

 

[bucktail]

Would a sickle mower work?

 

[River19]

Would a sickle mower work?

I think it would but it seems they cost ALL the money........

 

[River19]

Anyone have any experience with the "Victory Implements" stuff? 40" offset Flail for ~$2K

EMSD-40 Standard Duty Embankment Flail Mower | Victory Tractor

The EMSD-40 Embankment Flail Mower is perfect for standard duty applications, with a cutting width of 40 inches and adjustable cutting height. Its compact design and low profile make it easy to maneuver in tight spaces. This mower is designed to cut overgrown vegetation and weeds on slopes and ...

etractorimplements.com

 

[Crash277]

Anyone have any experience with the "Victory Implements" stuff? 40" offset Flail for ~$2K

EMSD-40 Standard Duty Embankment Flail Mower | Victory Tractor

The EMSD-40 Embankment Flail Mower is perfect for standard duty applications, with a cutting width of 40 inches and adjustable cutting height. Its compact design and low profile make it easy to maneuver in tight spaces. This mower is designed to cut overgrown vegetation and weeds on slopes and ...

etractorimplements.com

that is amazing!! i think im going to have to add that to my "wants list". sure would be handy to keep my pond edges looking good

 

[River19]

that is amazing!! i think im going to have to add that to my "wants list". sure would be handy to keep my pond edges looking good

I'm sure it is made of Chineseium but still for the average Joe doing residential maintenance it might be fine.......I thought it was interesting.......

 

[Elliott in GA]

If you want an inexpensive solution that will probably last (a cheap flail that is junk within a couple of years is no bargain - I have no knowledge about the quality of the EMSD-40), you might want to look at Sabre Samurai (less than 2K, if you already have a 3rd function or diverter). You might also be able to reach much further using the FEL versus an offset on the 3PT.

SABRE SAMURAI CUTTER - Cutthat.com - Your Cutting Edge Technology Expert

You've never seen a sickle bar like this before... A hydraulic motor powers an oscillating cam connecting two cutting blades. Varying the hydraulic flow using the engine throttle changes the speed of the blades. ✔ Cut material up to 1 1/2" inches in diameter.* ✔ Only requires 3 to 4.5 gal/min. ✔...

www.cutthat.com

 

[River19]

If you want an inexpensive solution that will probably last (a cheap flail that is junk within a couple of years is no bargain - I have no knowledge about the quality of the EMSD-40), you might want to look at Sabre Samurai (less than 2K, if you already have a 3rd function or diverter). You might also be able to reach much further using the FEL versus an offset on the 3PT.

SABRE SAMURAI CUTTER - Cutthat.com - Your Cutting Edge Technology Expert

You've never seen a sickle bar like this before... A hydraulic motor powers an oscillating cam connecting two cutting blades. Varying the hydraulic flow using the engine throttle changes the speed of the blades. ✔ Cut material up to 1 1/2" inches in diameter.* ✔ Only requires 3 to 4.5 gal/min. ✔...

www.cutthat.com

Thanks, I can take a look as I do have a 3rd function valve already......and no use for it ......yet....lol

 

[mcmxi]

I have a Del Morino Centurion Super 158 that's made in Italy and looks a lot like that EMSD-40 but cost three times as much. The Del Morino is a slick mower but that Chinese made EMSD might be slick too if it was reverse engineered properly.